Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR5 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM CSE-510FT-203B 128GB (4x32GB) DDR5 4800 CL40 1.1V 2Rx8 288-pin UDIMM memory upgrade

SKU CH-55DD-03PWG MPN CSE-510FT-203B

128 GB DDR5 kit with four 32 GB UDIMMs running at 4800 MT/s CL40 for Supermicro SYS-111AD-HN2 servers

  • Capacity128GB (4 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB total capacity with four 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • CL40 CAS latency for responsive data access
  • Low 1.1 V operating voltage reduces power draw
  • Validated for SuperMicro SYS-111AD-HN2 server compatibility

128 GB DDR5 Kit for SuperMicro SYS-111AD-HN2

This 128 GB kit contains four 32 GB DDR5 4800 modules built for the SuperMicro IoT SuperServer SYS-111AD-HN2. Each stick runs at 1.1 V with CL40 timing and uses a 2Rx8 unbuffered UDIMM layout. The 288-pin form factor matches the server's memory slots exactly.

Suits Admins Expanding That Specific SuperServer

Administrators adding memory to a SuperMicro IoT SuperServer SYS-111AD-HN2 will find the kit validated for that platform. Builders working with any other motherboard or chassis, or anyone needing ECC error correction, registered modules or a heat spreader, should look at a different part.

DDR5 4800 CL40 1.1 V 2Rx8 288-Pin UDIMM

The decisive spec is DDR5 4800 (PC5-38400) at CL40, 1.10 V, 2Rx8 unbuffered UDIMM. If the target system requires a different speed, voltage, rank layout or pin count, this kit will not be compatible.

Pluspunten

  • 128 GB total capacity with four 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • CL40 CAS latency for responsive data access
  • Low 1.1 V operating voltage reduces power draw
  • Validated for SuperMicro SYS-111AD-HN2 server compatibility

Specificaties

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-328K4
Capacity128GB (4 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB (4X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Vragen over dit artikel

How much power do the four 32GB DDR5 modules draw at 1.1V when the SuperMicro SYS-111AD-HN2 runs continuously?

Each module operates at 1.1V, the standard DDR5 voltage, so the kit draws only the power required for 128GB at 4800MT/s without any elevated voltage overhead.

What motherboard feature must the SuperMicro SYS-111AD-HN2 provide for this 288-pin UDIMM kit to function?

The board needs four DDR5 UDIMM slots that accept non-ECC unbuffered memory at 4800MT/s and 1.1V, which the SYS-111AD-HN2 is designed to supply.

Will the CL40 4800MHz sticks run stably beside any older DDR5 DIMMs I might keep in the SYS-111AD-HN2?

Mixing kits is not validated; the server is qualified for this specific 4x32GB CL40 kit, so adding different DDR5 modules could prevent the system from training at 4800MT/s.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.