Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green printed circuit board DDR5 UDIMM memory module with black chips and gold edge contacts

NEMIX RAM

NEMIX RAM CSE-510FT-203B 16GB DDR5 4800 CL40 1.1V 288-PIN UDIMM memory upgrade

SKU CH-QP9Q-1FEQC MPN CSE-510FT-203B

16 GB DDR5 4800 CL40 UDIMM for SuperMicro SYS-111AD-HN2 and CSE-510FT-203B servers

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16GB DDR5 capacity boosts multitasking headroom for SuperMicro IoT SuperServer
  • 4800MHz PC5-38400 speed delivers high throughput for demanding workloads
  • 10V low voltage operation reduces power draw and heat output
  • CL40 latency timing ensures responsive data access in compatible systems
  • 288-pin UDIMM form factor fits SuperMicro SYS-111AD-HN2 and X13SAZ-F motherboards

Compatible Supermicro DDR5 Memory

This 16GB DDR5 4800 module is built for the Supermicro IoT SuperServer SYS-111AD-HN2 and CSE-510FT-203B systems. It targets administrators upgrading those specific platforms with validated, non-ECC unbuffered memory.

Straightforward DIMM Installation

The 288-pin UDIMM slots into standard DDR5 sockets without tools. Because it is unbuffered and non-ECC, the system must support that configuration; buffered or ECC-only boards will not accept it.

Suits Single-Module Capacity Needs

Buyers expanding a compatible Supermicro server or workstation with one 16GB stick at 1.1V CL40 will find it a direct fit. Those requiring ECC protection, registered DIMMs, higher densities per slot, or memory for non-Supermicro platforms should look elsewhere.

Pluspunten

  • 16GB DDR5 capacity boosts multitasking headroom for SuperMicro IoT SuperServer
  • 4800MHz PC5-38400 speed delivers high throughput for demanding workloads
  • 10V low voltage operation reduces power draw and heat output
  • CL40 latency timing ensures responsive data access in compatible systems
  • 288-pin UDIMM form factor fits SuperMicro SYS-111AD-HN2 and X13SAZ-F motherboards

Specificaties

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM

Vragen over dit artikel

How can I confirm the 4800 MT/s CL40 DDR5 module is running at its rated speed after installation?

Enter the system BIOS or UEFI and check the memory information screen; it should report DDR5 4800 with CL40 timings at 1.10 V.

What ships in the package and is any extra hardware required?

The box contains one 16 GB 288-pin DDR5 UDIMM; no additional cables, brackets or heat spreaders are needed for installation.

Which capacity and rank option matches the CSE-510FT-203B SuperMicro IoT SuperServer?

This listing provides a single 16 GB 1Rx8 module built to the MD38400-618K1 part number validated for that platform.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.