Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM CSE-E101-04 16GB DDR5 4800 CL40 SODIMM memory upgrade

SKU CH-26HS-S6YNY MPN CSE-E101-04

16 GB DDR5 4800 SODIMM module with CL40 latency and 1.1 V operation for compatible Supermicro systems

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 4800 MHz for faster system responsiveness
  • CL40 CAS latency balances speed and stability
  • 1 V operation reduces power draw and heat
  • 262-pin SODIMM form factor fits Supermicro E100-13AD-H and X13SAN-H boards
  • Single-rank 1Rx8 design using Samsung Micron or Hynix chips ensures broad compatibility

System-Specific DDR5 SODIMM

This 16GB DDR5 4800 SODIMM is built for the SuperMicro IoT SuperServer SYS-E100-13AD-H and compatible X13SAN-H motherboards. It targets administrators upgrading memory in those exact platforms.

Unbuffered non-ECC module without a heat spreader

The 262-pin stick runs at 1.10V with a CL40 latency and a 1Rx8 organisation using major OEM chips from Samsung Micron or Hynix. Its unbuffered design means it plugs straight into the SODIMM slots on the validated boards.

DDR5 4800 bandwidth ceiling

The PC5-38400 interface caps throughput at the DDR5 4800 data rate so workloads needing higher transfer speeds will hit that limit. Systems requiring ECC error correction or registered buffering cannot use this module.

Pluspunten

  • 16 GB DDR5 4800 MHz for faster system responsiveness
  • CL40 CAS latency balances speed and stability
  • 1 V operation reduces power draw and heat
  • 262-pin SODIMM form factor fits Supermicro E100-13AD-H and X13SAN-H boards
  • Single-rank 1Rx8 design using Samsung Micron or Hynix chips ensures broad compatibility

Specificaties

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM

Vragen over dit artikel

What speed does the DDR5 4800 SODIMM run at in this SuperMicro server?

The module operates at DDR5 4800 (PC5-38400) with CL40 latency at 1.10V.

Will the 262-pin SODIMM fit the SYS-E100-13AD-H memory slot?

Yes, it is a 262-pin DDR5 SODIMM built for SuperMicro IoT SuperServer SYS-E100-13AD-H and X13SAN-H boards.

How do I install the 1Rx8 module and what step is often missed?

Power off, open the chassis, align the notch on the 262-pin SODIMM, insert at an angle, press down until the side clips click, then verify 16GB appears in BIOS.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.