Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Twelve green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 768GB 12x64GB Supermicro H14SSF memory upgrade

SKU CH-PC6T-M7XWB

A 768 GB DDR5 4800 ECC registered RDIMM kit of twelve 64 GB modules, validated for the Supermicro H14SSF motherboard

  • Capacity768GB (12 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 768GB 12X64GB

Nog 24 configuraties tonen

Speed 4800MHz

  • 768 GB total capacity across 12 matched 64 GB modules
  • DDR5 4800 MT/s speed with CL40 latency for rated server performance
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10 V operation at 2Rx4 rank exactly matches Supermicro H14SSF memory-controller requirements
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in the target motherboard

Supermicro H14SSF DDR5 RDIMM kit

This 768GB kit contains twelve 64GB DDR5 4800 registered ECC modules built to the exact rank, voltage and timing the Supermicro H14SSF memory controller expects. The 288-pin RDIMM form factor matches the board's DIMM slots and population rules so the full capacity is recognised at rated speed.

Suited for fully populated H14SSF servers

Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly, keeping production workloads stable when every slot is filled. Builders using consumer UDIMMs, non-ECC modules or a different DDR generation cannot use this kit because the pinout, voltage and signalling are incompatible.

Straightforward slot installation

Modules seat in the standard 288-pin DDR5 RDIMM slots with the key notch aligned; no heat spreader means clearance is not a concern. The most common issue is ignoring the motherboard manual's required population order, which can prevent the system from posting or recognising the full 768GB capacity.

Pluspunten

  • 768 GB total capacity across 12 matched 64 GB modules
  • DDR5 4800 MT/s speed with CL40 latency for rated server performance
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10 V operation at 2Rx4 rank exactly matches Supermicro H14SSF memory-controller requirements
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in the target motherboard

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K12
Capacity768GB (12 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 12X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does this 12-module 288-pin RDIMM kit require a Supermicro H14SSF motherboard to operate?

Yes, the kit is validated for the Supermicro H14SSF motherboard and its 288-pin registered DIMM slots; other boards may not support the 2Rx4 rank layout or population rules.

Can I mix these 64GB 2Rx4 DDR5-4800 CL40 modules with existing DDR5 RDIMMs of a different capacity or rank?

Mixing different capacities or ranks is not recommended; the H14SSF memory controller expects uniform 2Rx4 modules across all populated channels to run at the rated 4800 MT/s with CL40 timing.

How do I confirm the full 768GB is recognised and running at DDR5-4800 CL40 after installation?

Check the BIOS memory information screen or the OS memory report — both should show 768GB total, 12 modules detected, speed at 4800 MT/s and CAS latency at CL40.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.