Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR5 RDIMM modules, black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 192GB (2x96GB) CL40 1.1V 2Rx4 memory upgrade for Supermicro H14DSH

SKU CH-CM1J-X36N8

192 GB DDR5-4800 registered ECC RDIMM kit (2 × 96 GB, CL40, 1.1 V) validated for Supermicro H14DSH servers

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Nog 30 configuraties tonen
  • 192 GB kit lets Supermicro H14DSH run at full rated capacity
  • Registered ECC RDIMM corrects single-bit errors on the fly for uptime
  • DDR5-4800 CL40 at 1.1 V matches the board's exact timing spec
  • 2Rx4 dual-rank layout enables dense 96 GB modules per slot
  • 288-pin RDIMM form factor fits only the slots your motherboard provides

Exact-fit DDR5 upgrade for Supermicro H14DSH

This 192GB kit delivers two 96GB Registered ECC DDR5 RDIMMs rated at 4800MHz with CL40 latency and 1.10V operation. The 2Rx4 rank configuration and 288-pin form factor match the motherboard's memory controller requirements so the system recognises full capacity at rated speed. It is built for servers that demand registered memory with error correction.

Suited for administrators populating every slot

The registered architecture offloads the memory controller, allowing full population without signal degradation, while ECC corrects single-bit errors before they affect workloads. Buyers who need unbuffered UDIMMs, SODIMM form factors, or lower-capacity modules for consumer platforms should look elsewhere. Compatibility is limited to the validated Supermicro platform.

Kit contains two matched 96GB RDIMMs only

No heat spreaders, cables, software licences or additional accessories are included. The modules arrive ready for installation following the motherboard manual's population order and capacity guidelines. Lifetime replacement coverage and US-based technical support are provided by the manufacturer.

Pluspunten

  • 192 GB kit lets Supermicro H14DSH run at full rated capacity
  • Registered ECC RDIMM corrects single-bit errors on the fly for uptime
  • DDR5-4800 CL40 at 1.1 V matches the board's exact timing spec
  • 2Rx4 dual-rank layout enables dense 96 GB modules per slot
  • 288-pin RDIMM form factor fits only the slots your motherboard provides

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What motherboard slot type and DDR generation does the Supermicro H14DSH need for this 192GB DDR5 4800 kit?

The H14DSH requires 288-pin DDR5 RDIMM slots; this kit matches that form factor exactly.

Will the registered ECC design of this 2Rx4 kit work with the H14DSH memory controller when all slots are populated?

Yes, the registered architecture offloads the controller so every populated slot runs at the rated 4800 speed and full 192GB capacity.

How can I confirm the kit is running at its specified CL40 timing and 1.1V after installation?

Check the BIOS memory information screen; it should report DDR5 4800, CL40 and 1.1V for each installed module.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.