Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Six green DDR5 RDIMM sticks with black chips no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 576GB 6x96GB ECC RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-3S4T-P7WYT

A 576GB DDR5-5600 ECC RDIMM kit of six 96GB modules at 1.1V CL46, registered for full-capacity stability on Supermicro H13SSL-N

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Nog 24 configuraties tonen
  • Massive 576 GB capacity from six 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects errors and stabilises full population
  • 1 V operation matches the server memory controller spec
  • Verified fit for Supermicro H13SSL-N motherboard

Exact-Match DDR5 Server Upgrade

This 576GB kit provides six 96GB DDR5-5600 Registered ECC RDIMMs built to the Supermicro H13SSL-N motherboard's precise specifications. The modules operate at 1.1V with CL46 latency and a 2Rx4 rank structure that the memory controller expects. System administrators upgrading compatible Supermicro platforms receive the exact capacity and timing the board validates at full population.

Sustained Enterprise Stability

Registered buffering offloads the memory controller so all six slots run fully populated at rated speed without signal degradation. ECC circuitry corrects single-bit errors on the fly, preventing silent data corruption during continuous workloads. The 1.1V operating voltage keeps thermal output consistent across extended 24/7 operation in dense server chassis.

2Rx4 Rank Population Constraint

The 2Rx4 organisation determines whether this kit works in your specific H13SSL-N configuration; the board's memory-population rules allow only certain rank-per-channel combinations at maximum capacity. Builders needing a different rank structure or fewer populated slots cannot use this exact kit.

Pluspunten

  • Massive 576 GB capacity from six 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects errors and stabilises full population
  • 1 V operation matches the server memory controller spec
  • Verified fit for Supermicro H13SSL-N motherboard

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How much power does the 576GB DDR5 5600 kit draw at its rated 1.10V when the server runs continuously?

The kit operates at 1.10V, the standard DDR5 voltage, and uses registered ECC RDIMM modules that buffer signals to reduce electrical load on the memory controller during sustained full-capacity operation.

What motherboard slot type and population rules must my Supermicro H13SSL-N already have to accept this 6x96GB kit?

The board must provide 288-pin DDR5 RDIMM slots and support six 2Rx4 registered modules; consult the motherboard manual for the approved population order before installing all six DIMMs.

Will the CL46 2Rx4 registered ECC modules run at 5600MHz alongside any existing DDR5 RDIMMs I keep in the other slots?

The kit is spec-matched to the H13SSL-N memory controller at DDR5 5600 CL46 1.10V 2Rx4; mixing different ranks, speeds or latencies can force the controller to downclock all channels to the lowest common settings.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.