Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 768GB 6x128GB ECC RDIMM CL46 1.1V Supermicro H14DST-F memory upgrade

SKU CH-SPRH-2X2F4

A 768 GB DDR5 registered ECC kit of six 128 GB modules running at 5600 MHz with CL46 latency and 1.1 V, validated for the Supermicro H14DST-F motherboard

  • Capacity768GB (6 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 768GB 6X128GB

Nog 30 configuraties tonen
  • 768 GB total capacity lets you run memory-intensive workloads across six 128 GB modules
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro H14DST-F platform
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller for stable full-population operation
  • 1 V operating voltage matches the board's memory-controller specification for reliable recognition
  • 288-pin RDIMM form factor fits the required slots without UDIMM or SODIMM mismatches

Exact-match DDR5-5600 ECC RDIMM kit

This 768GB kit contains six 128GB DDR5 5600 registered ECC modules built to the precise rank, voltage and timing the Supermicro H14DST-F memory controller expects. It installs as a matched set so the server recognises full capacity at rated speed without manual tuning.

Suited for fully populated H14DST-F builds

The registered architecture and ECC let every slot run fully populated at 768GB while correcting single-bit errors on the fly. Buyers needing non-ECC UDIMMs, SODIMMs or a different pin count should look elsewhere because this kit only fits 288-pin RDIMM slots.

768GB headroom for memory-bound workloads

Six 2Rx4 modules deliver the maximum capacity this board supports when all channels are filled, keeping virtualisation hosts and in-memory databases in fast DRAM. Workloads that grow beyond 768GB or require higher frequencies than 5600 will exceed what this kit provides.

Pluspunten

  • 768 GB total capacity lets you run memory-intensive workloads across six 128 GB modules
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro H14DST-F platform
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller for stable full-population operation
  • 1 V operating voltage matches the board's memory-controller specification for reliable recognition
  • 288-pin RDIMM form factor fits the required slots without UDIMM or SODIMM mismatches

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K6
Capacity768GB (6 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 6X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What motherboard must I own for this 768GB DDR5 5600 ECC RDIMM kit to work?

This kit is verified compatible with the Supermicro H14DST-F motherboard and requires its 288-pin RDIMM slots.

Will this 6 x 128GB 2Rx4 registered kit run at its rated 5600 speed when all slots are populated on the H14DST-F?

Registered architecture offloads the memory controller so every slot runs fully populated at the rated DDR5 5600 speed.

How can I confirm the kit is operating at CL46 and 1.1V after installation?

Enter the BIOS or use a hardware monitoring utility to verify the memory runs at DDR5 5600 with CL46 timings at 1.1V.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.