BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00278456BTC
Op voorraad
NEMIX RAM
NEMIX RAM DDR5 5600MHz 192GB (2x96GB) ECC RDIMM CL46 1.1V 2Rx4 288-Pin for Dell PowerEdge XE9780L/XE9785L
192 GB registered DDR5 ECC kit in two 96 GB modules at 5600 MHz CL46 for Dell PowerEdge XE9780L and XE9785L servers
- Capacity192GB (2 x 96GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Massive 192GB capacity with two 96GB modules for heavy workloads
- DDR5 5600MHz speed delivers high bandwidth for data-intensive applications
- ECC registered design detects and corrects memory errors automatically
- Low 1.1V operation reduces power draw in dense server deployments
- Validated for Dell PowerEdge XE9780L and XE9785L rack servers
Purpose-built Dell PowerEdge upgrade
This registered ECC RDIMM kit is validated for Dell PowerEdge XE9780L and XE9785L rack servers. It delivers 192 GB total capacity across two 96 GB modules so memory-intensive workloads can run without swapping. Enterprise administrators who need guaranteed compatibility with these specific platforms will find the kit matches the required form factor and registration.
Steady-state throughput at rated speed
The modules operate at DDR5 5600 with a CAS latency of 46 and a nominal voltage of 1.1 V. Registered buffering and on-die ECC maintain signal integrity across all ranks during sustained read and write cycles. The dual-rank 2Rx4 organisation distributes load evenly so bandwidth remains consistent under continuous server demand.
Capacity per module decides fit
Each DIMM provides 96 GB in a single 288-pin package, so the server must support that density per slot. Systems limited to lower per-module capacities cannot use this kit even if the total memory ceiling is higher. Buyers who need smaller individual modules for denser slot populations should look elsewhere.
Pluspunten
- Massive 192GB capacity with two 96GB modules for heavy workloads
- DDR5 5600MHz speed delivers high bandwidth for data-intensive applications
- ECC registered design detects and corrects memory errors automatically
- Low 1.1V operation reduces power draw in dense server deployments
- Validated for Dell PowerEdge XE9780L and XE9785L rack servers
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB (2 x 96GB) DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Vragen over dit artikel
How much power does the 1.1V DDR5 kit draw under sustained load?
Each 96GB module runs at 1.1V; total system draw depends on the Dell PowerEdge XE9780L or XE9785L platform and workload.
Does the Dell PowerEdge XE9780L or XE9785L need a specific BIOS revision before installing this 2Rx4 RDIMM kit?
The kit is validated for the Dell PowerEdge XE9780L and XE9785L; consult Dell's memory population guide for required BIOS versions.
Can I mix these CL46 5600MHz modules with slower DDR5 RDIMMs already in the server?
The server will clock all channels to the slowest installed module; matching speed and latency avoids down-clocking the new 192GB kit.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00281046BTC
Op voorraad
