Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR5 RDIMM modules, black chips, no heat spreader, 288 pins

NEMIX RAM

NEMIX RAM DDR5 6400 192GB 2x96GB ECC RDIMM memory upgrade

SKU CH-182P-K7QAB

A 192 GB DDR5 registered ECC kit (2 × 96 GB) running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro X14SDV-36C-SP3F motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

  • 192 GB total capacity from two 96 GB modules
  • DDR5 6400 speed with CL52 latency at 1.1 V
  • Registered ECC RDIMM prevents data corruption under load
  • 2Rx4 dual-rank design enables full population on supported boards
  • Verified fit for Supermicro X14SDV-36C-SP3F motherboard

Server memory kit for Supermicro X14SDV-36C-SP3F

This 192GB kit contains two 96GB DDR5 6400 RDIMMs built to the exact rank, voltage and timing the board expects. Registered ECC architecture keeps every slot stable at full population while correcting single-bit errors on the fly. The modules arrive new and ready for installation in compatible enterprise servers.

Who this suits and who should look elsewhere

System administrators upgrading the named Supermicro motherboard with validated DDR5 6400 Registered ECC memory will get plug-and-play capacity. Builders using consumer boards, laptops or any platform that requires UDIMM or SODIMM form factors cannot use these modules. Buyers needing non-ECC memory or lower-voltage operation should select a different kit.

What to verify before ordering

Confirm the motherboard manual lists 96GB RDIMM support and the approved population order for two modules. Check that the system BIOS is current enough to recognise the full 192GB capacity at DDR5 6400. Ensure the chassis has clearance for standard-height 288-pin RDIMMs and that the power supply delivers stable 1.1V to the memory slots.

Pluspunten

  • 192 GB total capacity from two 96 GB modules
  • DDR5 6400 speed with CL52 latency at 1.1 V
  • Registered ECC RDIMM prevents data corruption under load
  • 2Rx4 dual-rank design enables full population on supported boards
  • Verified fit for Supermicro X14SDV-36C-SP3F motherboard

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does my motherboard need 288-pin DDR5 RDIMM slots to accept this 192GB kit?

Yes, the kit uses 288-pin DDR5 RDIMM form factor, which matches the slot type required by the Supermicro X14SDV-36C-SP3F motherboard listed in the compatibility data.

Will the registered ECC design of these 2Rx4 modules work with my existing registered ECC RDIMMs?

These modules are registered ECC RDIMMs with 2Rx4 organisation and 1.10V operation; mixing them with other registered ECC RDIMMs of the same voltage, rank structure and DDR5-6400 speed is supported by the platform's memory population rules.

How can I confirm the kit is running at DDR5-6400 CL52 after installation?

Check the BIOS memory information or use a tool such as dmidecode to verify each DIMM reports 6400 MT/s, CL52 latency, 1.10V voltage and 2Rx4 registered ECC configuration.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.