Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Six green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM DDR5 6400 576GB (6x96GB) ECC RDIMM CL52 1.1V 2Rx4 288-pin memory upgrade

SKU CH-DB9G-CT6PZ

A 576GB kit of six 96GB DDR5 ECC registered DIMMs running at 6400 MT/s with CL52 latency and 1.1V operation for the Gigabyte MZ73-LM1 motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Nog 24 configuraties tonen
  • Massive 576 GB capacity from six 96 GB modules for memory-intensive workloads
  • DDR5 6400 speed delivers high bandwidth for demanding server applications
  • Registered ECC design corrects single-bit errors to protect data integrity
  • 1 V operation reduces power draw in fully populated systems
  • 288-pin RDIMM form factor matches GIGABYTE MZ73-LM1 motherboard requirements

576GB DDR5-6400 ECC RDIMM kit for GIGABYTE MZ73-LM1

This 576GB kit contains six 96GB DDR5-6400 registered ECC modules built to the exact rank, voltage and timing the GIGABYTE MZ73-LM1 memory controller expects. It is intended for server administrators who need maximum supported capacity on this specific motherboard without manual tuning.

Replaces slower or smaller DDR5 RDIMM sets

The jump is worth it when the workload demands the full 576GB at the board's native 6400MT/s data rate and registered ECC stability. Builders staying with lower-capacity kits or mixed-rank configurations will not gain the same memory bandwidth or error-correction coverage across every populated slot.

Limited to systems that accept 288-pin DDR5 RDIMMs

The modules will not fit UDIMM or SODIMM slots, nor will they operate in boards that require different voltages, unbuffered signalling or lower maximum densities. Compatibility is confined to platforms validated for 2Rx4 registered ECC DDR5 at this speed and pin count.

Pluspunten

  • Massive 576 GB capacity from six 96 GB modules for memory-intensive workloads
  • DDR5 6400 speed delivers high bandwidth for demanding server applications
  • Registered ECC design corrects single-bit errors to protect data integrity
  • 1 V operation reduces power draw in fully populated systems
  • 288-pin RDIMM form factor matches GIGABYTE MZ73-LM1 motherboard requirements

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 288-pin RDIMM modules fit the GIGABYTE MZ73-LM1 motherboard DIMM slots?

Yes, the 288-pin Registered DDR5 RDIMM form factor matches the slots required by the GIGABYTE MZ73-LM1 motherboard. UDIMM or SODIMM modules will not fit.

What is the correct population order for the six 96GB 2Rx4 modules on the MZ73-LM1?

Consult the GIGABYTE MZ73-LM1 manual for the approved DIMM population sequence. The board's memory-population rules dictate which slots must be filled first for all six modules to be recognised at full 576GB capacity.

Do these Samsung Micron or Hynix chip modules require any firmware updates or periodic maintenance?

No firmware updates are needed for the memory modules themselves. Keep the server's BIOS current per GIGABYTE recommendations. ECC corrects single-bit errors automatically; modules are replaced only if uncorrectable errors appear.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.