BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00277891BTC
Op voorraad
NEMIX RAM
NEMIX RAM DDR5 6400 96GB (6×16GB) ECC RDIMM CL52 1.1V Supermicro H13SVW-N memory upgrade
A 96 GB DDR5-6400 registered ECC kit in six 16 GB modules at 1.1 V CL52, validated for the Supermicro H13SVW-N motherboard
- Capacity96GB (6 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB capacity from six 16 GB modules for full server utilisation
- DDR5 6400 speed with CL52 latency delivers rated performance
- Registered ECC architecture corrects single-bit errors for data integrity
- 1 V operation matches platform requirements for stable operation
- 288-pin RDIMM form factor fits Supermicro H13SVW-N motherboard exactly
Exact-match server upgrade
This 96GB kit contains six 16GB DDR5 RDIMMs rated at 6400MT/s with CL52 latency and 1.1V operation. The modules are built with registered ECC architecture for Supermicro H13SVW-N motherboards. Each stick uses a 1Rx8 organisation and the standard 288-pin form factor. The kit is new and ready for installation.
Registered ECC with 1Rx8 rank
Registered buffering offloads the memory controller so all six slots can run fully populated at the rated 6400 speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. The 1Rx8 rank and 1.1V voltage match the board's memory-controller expectations exactly. No heat spreaders are fitted on these modules.
For Supermicro H13SVW-N population rules
This kit suits administrators who need the precise rank, voltage and timing the H13SVW-N requires for full-capacity operation. Builders using UDIMM or SODIMM slots cannot use these RDIMMs. Systems that demand a different speed, voltage or rank organisation should look elsewhere. Consult the motherboard manual for approved DIMM population order before purchase.
Pluspunten
- 96 GB capacity from six 16 GB modules for full server utilisation
- DDR5 6400 speed with CL52 latency delivers rated performance
- Registered ECC architecture corrects single-bit errors for data integrity
- 1 V operation matches platform requirements for stable operation
- 288-pin RDIMM form factor fits Supermicro H13SVW-N motherboard exactly
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K6 |
| Capacity | 96GB (6 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 6X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Vragen over dit artikel
What does the DDR5 6400 speed rating mean once the kit is installed in a Supermicro H13SVW-N server?
The modules run at 6400 MT/s, delivering PC5-51200 bandwidth when the memory controller is populated with all six 1Rx8 registered DIMMs at 1.1 V.
How does the registered ECC interface affect real-world operation on this motherboard?
Registered buffering reduces electrical load on the controller so every slot stays stable at full 96 GB capacity, while ECC corrects single-bit errors on the fly to prevent silent data corruption.
What physical slot and form factor do these modules need to fit the H13SVW-N?
They are 288-pin DDR5 RDIMMs; the board requires registered DIMMs, not UDIMMs or SODIMMs, and the kit matches the motherboard's population rules.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00280476BTC
Op voorraad
