BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00277195BTC
Op voorraad
NEMIX RAM
NEMIX RAM DDR5 6400MHz ECC Registered RDIMM 1.1TB (12 x 96GB) CL52 1.1V 2Rx4 288-pin memory upgrade
A 1.1 TB DDR5 registered ECC kit with twelve 96 GB modules at 6400 MHz, CL52, 1.10 V, 2Rx4, validated for Supermicro H13SSW
- Capacity1.1TB (12 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 1TB total capacity from 12 modules of 96GB each
- DDR5 6400MHz speed with CL52 latency for high-throughput server workloads
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 10V operating voltage reduces power draw across all 12 DIMMs
- 288-pin RDIMM form factor verified for Supermicro H13SSW motherboard
Purpose-built server upgrade
This 1.1 TB kit delivers twelve 96 GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.10 V operation. It targets administrators expanding Supermicro H13SSW platforms that require registered ECC memory in a fully populated 288-pin layout.
Thermals and power profile
Registered buffering reduces electrical load on the memory controller, allowing all twelve slots to run at rated speed without additional active cooling. The 1.10 V nominal voltage keeps per-module power draw low, so standard server airflow handles thermals without extra fan speed.
What the kit changes
Populating every channel with matched 2Rx4 modules lets the board initialise at full capacity and rated frequency, while on-die ECC corrects single-bit errors before they affect workloads. The precise rank, voltage and timing alignment removes the trial-and-error phase from large-capacity upgrades.
Pluspunten
- 1TB total capacity from 12 modules of 96GB each
- DDR5 6400MHz speed with CL52 latency for high-throughput server workloads
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 10V operating voltage reduces power draw across all 12 DIMMs
- 288-pin RDIMM form factor verified for Supermicro H13SSW motherboard
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K12 |
| Capacity | 1.1TB (12 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.1TB 12X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Vragen over dit artikel
How do I install the 12 DDR5 288-pin RDIMM modules in the Supermicro H13SSW, and which population order do people often miss?
Follow the H13SSW manual slot sequence exactly — populate channels in the prescribed order so the 12 modules are recognised at full 1.1 TB capacity.
What maintenance or replacement will this ECC Registered RDIMM kit need over its service life?
No routine maintenance is required; the registered DDR5 ECC design corrects single-bit errors on the fly, and a lifetime replacement warranty covers any module failure.
What limit appears first when the 1.1 TB DDR5-6400 kit runs sustained workloads?
The registered buffer and 1.10 V operation keep all 12 slots stable at rated speed, so the first ceiling is the motherboard's maximum supported capacity and population rules.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00279774BTC
Op voorraad
