BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00279248BTC
Op voorraad
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1TB 16x64GB 5600MHz CL46 1.1V 2Rx4 288-Pin Supermicro H13SSF memory upgrade
A 1TB kit of 16 DDR5 RDIMMs running at 5600MHz with ECC and registered buffering for the Supermicro H13SSF motherboard
- Capacity1TB (16 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 1TB total capacity from sixteen 64GB modules
- DDR5 5600 speed with CL46 latency
- Registered ECC design for error correction and full-slot stability
- 1V operation at 2Rx4 rank configuration
- Verified fit for Supermicro H13SSF motherboard
Exact-match DDR5 RDIMM kit for Supermicro H13SSF
This 1 TB kit contains sixteen 64 GB DDR5-5600 registered ECC modules built to the PC5-44800 standard. Each DIMM runs at 1.1 V with CL46 timing and a 2Rx4 organisation. The 288-pin RDIMM form factor matches the memory controller requirements of the Supermicro H13SSF motherboard so the full capacity is recognised at rated speed.
Sustained-load behaviour with registered ECC
Registered buffering reduces electrical load on the memory controller when all sixteen slots are populated, allowing stable operation at the full 5600 MT/s data rate under continuous server workloads. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption that could otherwise trigger unplanned reboots during long-running compute or database tasks.
Installation steps and common issues
The modules are keyed for 288-pin DDR5 RDIMM slots only; they will not fit UDIMM or SODIMM sockets. Before installation, consult the Supermicro H13SSF manual for the approved DIMM population sequence and maximum supported capacity per channel. A frequent issue occurs when DIMMs are inserted in the wrong slot order or when the BIOS is not updated to the version that validates the full 1 TB configuration.
Pluspunten
- 1TB total capacity from sixteen 64GB modules
- DDR5 5600 speed with CL46 latency
- Registered ECC design for error correction and full-slot stability
- 1V operation at 2Rx4 rank configuration
- Verified fit for Supermicro H13SSF motherboard
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K16 |
| Capacity | 1TB (16 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB 16X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Vragen over dit artikel
How much power does the 1.1V DDR5 5600 kit draw when all 16 slots run continuously?
Each module operates at 1.1V, the standard DDR5 voltage, so total draw depends on your motherboard's power delivery across all 16 populated slots.
What must the Supermicro H13SSF already have to accept this 16×64GB RDIMM kit?
The board needs 16 free 288-pin DDR5 RDIMM slots and a BIOS that supports 2Rx4 registered ECC modules at the full 1TB capacity.
Will the 2Rx4 registered ECC modules work alongside any older DDR5 DIMMs I keep in the same server?
Mixing ranks or capacities can break the memory controller's population rules; the manual should be checked for approved configurations before adding these 64GB sticks.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00281845BTC
Op voorraad
