Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM HPE DDR4 2666 ECC RDIMM 8GB CL19 288-Pin 1Rx8 memory upgrade

SKU CH-JTXA-KXE2X

An 8 GB DDR4-2666 ECC registered DIMM built for HPE servers and workstations

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • Registered buffering stabilises signal integrity for server platforms
  • 2666 MHz DDR4 speed delivers 21300 MT/s bandwidth
  • 20 V low voltage reduces power draw per module
  • 288-pin RDIMM form factor fits HPE 815097 compatible systems

HPE-Compatible DDR4 RDIMM

This NEMIX RAM module delivers 8 GB of DDR4 2666 ECC registered memory for HPE servers and workstations. It runs at 1.20 V with CL19 latency and a 1Rx8 organisation. The 288-pin RDIMM form factor matches the mechanical and electrical requirements of the listed HPE part numbers.

Who This Suits

IT teams maintaining HPE platforms that specify 815097-B21, 815097-H21 or 815097-K21 will find a direct replacement. Builders needing non-ECC unbuffered DIMMs, higher capacities per module, or faster speeds should look at other memory types.

Deciding Specification

The registered ECC design with 1Rx8 architecture determines whether the module works in your HPE system; only platforms that accept registered DDR4 2666 RDIMMs can use this part.

Pluspunten

  • ECC protection prevents data corruption in critical workloads
  • Registered buffering stabilises signal integrity for server platforms
  • 2666 MHz DDR4 speed delivers 21300 MT/s bandwidth
  • 20 V low voltage reduces power draw per module
  • 288-pin RDIMM form factor fits HPE 815097 compatible systems

Specificaties

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR21300-818K1
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHPE
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory

Vragen over dit artikel

Will the CL19 latency become a bottleneck during sustained server workloads?

CL19 is the rated CAS latency for this DDR4 2666 module; it is the primary timing limit you will see under continuous load.

How much heat does the 1.2V registered DIMM produce when running all day?

The module operates at 1.20V without a heat spreader; registered ECC RDIMMs at this voltage typically run cool enough for standard server airflow.

Which HPE part numbers must my server already support for this 8GB stick to work?

This memory is validated for HPE part numbers 815097-B21, 815097-H21 and 815097-K21; your system must accept one of those.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.