Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

NShi

NShi Server Chassis RPS-500-18-C 18V 27.8A 500.4W

SKU CH-E7EX-KTQTJ

Delivers 500.4 W at 18 V 27.8 A with 94 % efficiency and medical 2×MOPP approval

  • Chassis TypeDesktop
  • Medical-grade safety with 2×MOPP certification to 60601-1
  • Wide 80–264 VAC input suits global deployments
  • Up to 94 % efficiency cuts energy waste
  • Operates from −30 °C to +70 °C without derating
  • Leakage current below 220 µA protects patient-contact equipment

Medical-Grade Server Power Supply

The NShi RPS-500-18-C is a 500.4 W desktop server chassis power supply delivering 18 V at 27.8 A. It carries 2×MOPP medical safety approval to ANSI/AAMI ES60601-1 and IEC/BS EN/EN60601-1. Efficiency reaches 94 % and no-load draw stays below 0.5 W under PS_ON control.

Suited For Regulated Medical Builds

This unit fits engineers integrating BF-rated patient-contact equipment that requires Class I or Class II EMI compliance to EN55011. Builders needing other output voltages, higher continuous power, or non-medical industrial certifications should look at alternative series.

500.4 W Continuous With Wide Temperature Headroom

The supply maintains full rated output across a -30 °C to +70 °C operating range and accepts 80–264 V AC input. Leakage current remains under 220 µA. Over-voltage, overload, short-circuit and over-temperature protections shut down the unit before components are stressed beyond safe limits.

Pluspunten

  • Medical-grade safety with 2×MOPP certification to 60601-1
  • Wide 80–264 VAC input suits global deployments
  • Up to 94 % efficiency cuts energy waste
  • Operates from −30 °C to +70 °C without derating
  • Leakage current below 220 µA protects patient-contact equipment

Specificaties

Chassis TypeDesktop

Vragen over dit artikel

What input voltage range must my facility provide for this 500.4 W medical power supply to operate?

The unit accepts 80 to 264 VAC, so any standard mains supply within that window will power it.

Can I install this chassis in a system that uses a Class II design without a protective earth connection?

Yes, the blank-type RPS-500 is approved for both Class I with FG and Class II without FG configurations.

How can I verify the supply is running efficiently after installation?

Measure the output under load; the efficiency reaches up to 94 percent and no-load draw stays below 0.5 W when PS_ON is active.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.