Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 40mm square 24V 0.08A 3-pin CPU fan

OEM Industries

OEM Industries 1606KL-05W-B50 40mm 24V 0.08A 3-Pin CPU Cooler

SKU CH-B76W-RYV2J

Compact 40 mm ball-bearing fan runs on 24 V at 0.08 A with a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 40 mm frame fits tight chassis spaces
  • 24 V 0.08 A draw keeps power demand low
  • Ball-bearing motor extends operational life
  • Three-pin connector enables speed monitoring
  • Black square design suits discreet builds

Compact 40 mm case fan

The OEM Industries 1606KL-05W-B50 is a 40 mm square DC fan designed for chassis ventilation. It runs on a 24 V supply and draws 0.08 A through a three-pin connector. The black frame houses a ball-bearing motor without any LED lighting.

Suited for tight airflow paths

This fan suits builders who need a small 40 mm unit for auxiliary case cooling or replacement in legacy equipment. It is not intended for direct CPU heatsink mounting, for high-static-pressure radiator use, or for systems that require PWM speed control via a four-pin header.

Steady low-power operation

Under continuous load the ball bearing maintains consistent rotation at the rated voltage and current. The three-wire connection allows the motherboard to monitor RPM while the fan runs at a fixed 24 V level. No thermal throttling or speed curves are built into the device itself.

Pluspunten

  • Compact 40 mm frame fits tight chassis spaces
  • 24 V 0.08 A draw keeps power demand low
  • Ball-bearing motor extends operational life
  • Three-pin connector enables speed monitoring
  • Black square design suits discreet builds

Specificaties

Model1606KL-05W-B50
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Vragen over dit artikel

What voltage header must my motherboard provide for this 24 V fan to spin?

The fan is rated for 24 V, so the motherboard header or fan controller must supply 24 V.

Can I plug this 40 mm, 3-pin cooler into a standard 4-pin PWM header on an older board?

Yes, the 3-pin connector fits a 4-pin header; the fan will run at full speed because PWM control is not present.

How can I verify the 0.08 A ball-bearing fan is running correctly after installation?

Check that the fan spins smoothly at full speed and listen for quiet ball-bearing operation with no rattling.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.