Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 80mm square CPU cooler with 3-pin connector

OEM Industries

OEM Industries 3110RL-04W-B86 80mm 25mm 12V .33A 3 Pin CPU cooler

SKU CH-0X7C-JJRZ0

80 mm square CPU cooler with ball-bearing fan, 12 V 0.33 A three-pin power

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 80 mm frame fits standard mounting points
  • Ball bearing design reduces friction for longer life
  • 12 V, 0.33 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Compact 25 mm depth suits tight chassis

Compact 80 mm CPU cooler for tight builds

The OEM Industries 3110RL-04W-B86 is a square DC fan measuring 80 by 25 mm that mounts directly on a processor heatsink. It runs on 12 V at 0.33 A and connects through a standard three-pin header. The ball-bearing design and black finish suit replacement or custom cooling in small-form-factor systems.

Suits repair technicians

This cooler fits situations where the motherboard header and mounting holes match the 80 mm footprint and three-wire interface. Builders who require PWM control, larger airflow, or a four-pin connector should look elsewhere because this unit provides only fixed-speed operation on three pins.

12 V 0.33 A three-pin power draw decides

The cooler draws 0.33 amps at 12 volts through its three-pin connector, so the motherboard header must supply that current without PWM signalling. If the board expects a four-pin PWM fan or a different current profile, this model will not function as intended.

Pluspunten

  • 80 mm frame fits standard mounting points
  • Ball bearing design reduces friction for longer life
  • 12 V, 0.33 A draw keeps power use low
  • Three-pin connector enables speed monitoring
  • Compact 25 mm depth suits tight chassis

Specificaties

Model3110RL-04W-B86
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Vragen over dit artikel

Will the 3110RL-04W-B86's 3-pin connector work with my motherboard's 4-pin CPU fan header?

Yes, the 3-pin plug fits a 4-pin header; the fan will run at full 12 V speed since PWM control is not present on the third wire.

How can I confirm the ball-bearing fan is spinning correctly once installed?

Check the BIOS hardware monitor or a monitoring utility — it should report a steady RPM reading for the CPU fan header with no error warnings.

Does the cooler include mounting hardware for a specific socket, or only the 80 mm fan unit?

The package contains the 80 mm square fan with 3-pin lead; any retention brackets, back-plates or thermal paste must be sourced separately.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.