Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small square black and yellow fan with three wires

OEM Industries

OEM Industries D06R-12SH 60mm 12V 3 Pin CPU cooler

SKU CH-5ZCS-BME03

A 60 mm sleeve-bearing fan with a 3-pin 12 V connector for compact cooling projects

  • ColorBlack&Yellow
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeSleeve Bearing
  • Power Connector3 Pin
  • LEDNo
  • Reliable 12 V operation with 0.10 A draw
  • Compact 60 mm frame fits tight 15 mm spaces
  • Three-pin connector enables speed monitoring
  • Sleeve bearing keeps noise low in steady use
  • New Nidec build ensures consistent factory quality

Compact 60mm fan for tight builds

The OEM Industries D06R-12SH is a 60mm DC cooling fan designed for small-form-factor systems and projector maintenance. It runs on 12V power and draws 0.10A through a standard three-pin connector. The black and yellow unit measures 15mm thick and uses a sleeve bearing. It is sold as a fan only without heatsink or mounting hardware.

Three-pin connector limits speed reporting

The three-pin interface supplies power and a tachometer signal but does not support PWM control. Motherboard headers can monitor RPM but cannot vary voltage automatically. Builders needing automatic temperature curves must add a separate fan controller or use voltage-adjusting software. The 12V rating matches standard PC headers but offers no headroom for undervolting below 12V.

Sleeve bearing suits low-noise stationary use

The sleeve bearing runs quietly at consistent speeds but wears faster if the fan is tilted or moved frequently. The 60mm frame fits legacy CPU coolers and industrial projector housings with 60mm mounting holes. No LED lighting keeps the profile discreet for dark chassis. The thin 15mm profile clears tight clearances around memory slots or power circuitry.

Pluspunten

  • Reliable 12 V operation with 0.10 A draw
  • Compact 60 mm frame fits tight 15 mm spaces
  • Three-pin connector enables speed monitoring
  • Sleeve bearing keeps noise low in steady use
  • New Nidec build ensures consistent factory quality

Specificaties

ModelD06R-12SH
ColorBlack&Yellow
TypeFan only
Fan Size60mm
Bearing TypeSleeve Bearing
Power Connector3 Pin
LEDNo

Vragen over dit artikel

Is this 60mm 12V fan the right size for my 60mm mounting holes?

Yes, the frame measures 60mm square and 15mm thick, matching standard 60mm fan mounts.

What does the 0.10A rating mean for my 12V fan header?

It draws 0.10A at 12V, so a typical motherboard header rated for 1A or more will run it with plenty of margin.

How does the 3-pin connector control speed on a modern motherboard?

The board varies the 12V line to change RPM; the third wire reports speed back to the BIOS for monitoring.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.