Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 80mm square fan with three wire connector

OEM Industries

OEM Industries D08K-12TU 80mm 12V .19A 3 Pin Ball Bearing CPU cooler

SKU CH-7N61-BPCER

An 80 mm ball-bearing fan running at 12 V and 0.19 A with a three-pin connector, sized 80×80×25 mm for the EMP-820 projector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Reliable airflow from ball-bearing design
  • 12 V operation draws only 0.19 A
  • Fits 80 mm mounting with 25 mm depth
  • Three-pin connector enables speed monitoring
  • Built for EMP-820 projector cooling duties

Compact 80 mm Fan for EMP-820 Projector

This 80 mm ball-bearing fan operates at 12 V and draws 0.19 A through a three-pin connector. It is built to the 8025 form factor and intended as a direct replacement for the original Nidec D08K-12TU unit used in the EMP-820 projector.

No Extra Accessories or Software Included

The package supplies the fan only, without mounting hardware, cables or control software. Installers must reuse existing screws and connect the three-pin header to the projector’s fan header for power and speed reporting.

Three-Pin Voltage Control Limits Speed Adjustment

The three-pin interface allows voltage-based speed regulation but does not support PWM duty-cycle control. This means the fan speed range depends on the host device’s voltage output and cannot be tuned as precisely as a four-pin PWM design would allow.

Pluspunten

  • Reliable airflow from ball-bearing design
  • 12 V operation draws only 0.19 A
  • Fits 80 mm mounting with 25 mm depth
  • Three-pin connector enables speed monitoring
  • Built for EMP-820 projector cooling duties

Specificaties

ModelD08K-12TU
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Vragen over dit artikel

How often should the ball bearing in the 80mm fan be replaced?

The ball bearing is sealed for the life of the fan and requires no scheduled replacement.

What limits continuous operation of the 12V .19A motor?

The motor is rated for continuous 12V operation; the 0.19A draw is its steady-state limit.

How much noise and heat does the 8025 fan produce when running all day?

The 80x80x25mm frame moves air at 12V with no LED, so acoustic and thermal output stay constant during extended use.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.