Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small black 40mm sleeve bearing fan with two wires and a 2-pin connector

OEM Industries

OEM Industries DS0410S12L 40mm Sleeve Bearing Fan

SKU CH-0NKS-FK7GB

A 40mm sleeve-bearing fan running on 12V 0.08A with a 2-pin connector for compact cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • 40 mm fan fits tight chassis spaces
  • Sleeve bearing runs quietly at low speeds
  • 12 V 0.08 A draw keeps power use minimal
  • Two-pin connector simplifies wiring in projects
  • Black frame suits projector and camcorder builds

40 mm Sleeve Bearing Fan

The OEM Industries DS0410S12L is a 40 mm axial fan built with a sleeve bearing for quiet, low-cost airflow. It runs on 12 V and draws only 0.08 A through a two-pin power connector, making it a compact cooling component for tight spaces. The black frame and blade design keep the appearance neutral inside any chassis.

For Small-Form-Factor Maintenance

This unit suits technicians replacing a failed fan in projectors, video recorders or legacy small-form-factor PCs where a 40 mm two-pin cooler is specified. Builders needing PWM speed control, a tachometer signal or higher static pressure for dense heatsinks should look at a different part because this fan provides only fixed-voltage operation.

12 V 0.08 A Two-Pin Power

The electrical rating of 12 V at 0.08 A and the two-pin connector are the decisive specifications; the replacement device must match both voltage and connector type exactly or it will not power correctly in the target equipment.

Pluspunten

  • 40 mm fan fits tight chassis spaces
  • Sleeve bearing runs quietly at low speeds
  • 12 V 0.08 A draw keeps power use minimal
  • Two-pin connector simplifies wiring in projects
  • Black frame suits projector and camcorder builds

Specificaties

ModelDS0410S12L
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Vragen over dit artikel

What does the 12 V .08 A rating mean when the fan is running in a device?

The fan draws 0.08 A at 12 V, providing low power consumption suitable for compact projector or camcorder chassis.

What does the 2-pin connector limit compared to a 3-pin or 4-pin header?

The 2-pin connector supplies power only, so the motherboard or controller cannot monitor speed or adjust it via PWM.

Will the 40 mm frame with 410 mounting pattern fit my existing bracket?

The fan uses a standard 40 mm square frame with 410 hole spacing, matching common 40 mm mounting brackets.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.