Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black square 80x25mm CPU cooler with 4-pin connector

OEM Industries

OEM Industries DS08025T12U 80x25mm 4 Pin CPU Cooler

SKU CH-NPPT-JF57Y

80 mm hydraulic-bearing fan with 4-pin PWM control and 12 V .7 A rating

  • ColorBlack
  • TypeFan only
  • Fan Size82mm
  • Bearing TypeHydraulic
  • Power Connector4 Pin
  • LEDNo
  • Hydraulic bearing reduces friction for quieter operation
  • 4-pin PWM connector enables precise speed control
  • 12V 0.7A rating delivers efficient cooling power
  • 82mm frame fits standard 80mm mounting points
  • Black finish suits professional or stealth builds

80 mm Hydraulic-Bearing CPU Fan

The OEM Industries DS08025T12U is an 80 mm square frame cooler with a 25 mm profile. It runs on 12 V drawing 0.7 A through a four-pin PWM connector. The hydraulic bearing and black finish suit compact builds that need straightforward airflow.

Suits tight chassis and replacement upgrades

This fan fits cases or heatsinks designed for an 80 mm mounting pattern and a four-pin header. Builders needing larger diameters, RGB lighting or higher static pressure should look elsewhere.

Simple four-pin drop-in

Align the screw holes, secure the fan and plug the connector into the motherboard header. The only common issue is reversing the plug orientation, which prevents speed control.

Pluspunten

  • Hydraulic bearing reduces friction for quieter operation
  • 4-pin PWM connector enables precise speed control
  • 12V 0.7A rating delivers efficient cooling power
  • 82mm frame fits standard 80mm mounting points
  • Black finish suits professional or stealth builds

Specificaties

ModelDS08025T12U
ColorBlack
TypeFan only
Fan Size82mm
Bearing TypeHydraulic
Power Connector4 Pin
LEDNo

Vragen over dit artikel

Do I need a motherboard header that supplies 12 V and can deliver at least .7 A for this DS08025T12U cooler?

Yes, the fan draws .7 A at 12 V, so the 4‑pin CPU fan header must be rated for that current.

Will the 4‑pin PWM connector on this 80×25 mm unit work with an older board that only has a 3‑pin header?

The 4‑pin plug fits a 3‑pin header; the fan will run at full speed continuously because the PWM wire is left unconnected.

How can I confirm the hydraulic‑bearing fan is spinning at the correct speed after installation?

Check the RPM reading in BIOS or monitoring software — it should report a stable value that changes when the PWM duty cycle changes.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.