Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Transparent frameless cooling fan with two-wire power connector

OEM Industries

OEM Industries FS1280-A1342C frameless fan 12V .18A 2-pin

SKU CH-2EQ9-HVDMS

A frameless cooling fan running on 12V and drawing .18A via a 2-pin connector

  • ColorTransparent
  • TypeFan only
  • Power Connector2 Pin
  • LEDNo
  • Frameless design fits tight spaces around components
  • 12 V .18 A draw keeps power load low
  • Two-pin connector plugs straight into legacy headers
  • Transparent blades blend into any build aesthetic
  • Fan-only unit adds airflow without extra bulk

Frameless 12 V fan for targeted airflow

The OEM Industries FS1280-A1342C is a frameless 12 V cooling fan drawing 0.18 A through a two-pin connector. Its open frame reduces bulk so it can sit in tight spots around a graphics card or inside a small-form-factor chassis where a conventional housing would not fit.

Builders needing a slim.

This unit suits builders who want a lightweight 12 V fan to supplement video-card cooling without adding height. It is not for systems that require PWM speed control, tachometer feedback or higher static pressure than a 0.18 A two-wire motor can deliver.

0.18 A headroom for auxiliary cooling duties

At 0.18 A the fan draws minimal power from a 12 V rail, leaving ample headroom on the same header for additional low-current devices. It runs out of steam when the thermal load demands focused, high-pressure airflow that a frameless design cannot generate.

Pluspunten

  • Frameless design fits tight spaces around components
  • 12 V .18 A draw keeps power load low
  • Two-pin connector plugs straight into legacy headers
  • Transparent blades blend into any build aesthetic
  • Fan-only unit adds airflow without extra bulk

Specificaties

ModelFS1280-A1342C
ColorTransparent
TypeFan only
Power Connector2 Pin
LEDNo

Vragen over dit artikel

Does my motherboard need a 2-pin header to power this FS1280-A1342C fan?

Yes, the fan uses a 2-pin connector drawing 0.18 A at 12 V, so a matching 2-pin header on the board or a compatible adapter is required.

Can I run this frameless fan on the same 12 V rail as my older 3-pin or 4-pin fans?

The fan operates at 12 V and 0.18 A on two wires, so it can share a 12 V rail with other fans; each fan draws its own current independently.

How can I confirm the FS1280-A1342C is spinning correctly after installation?

Power the system and visually check that the transparent frameless blades rotate smoothly; the 2-pin design has no speed signal, so rotation is the only direct indication.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.