Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black square 60mm CPU cooler fan with 2-pin connector

OEM Industries

OEM Industries KD1206PHS2 60mm 12V 1.9W 2-Pin CPU cooler

SKU CH-N5KM-C165X

A 60 mm square fan cooler running at 12 V and 1.9 W with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Compact 60 mm frame fits tight chassis
  • 12 V 1.9 W draw keeps power use low
  • Two-pin connector enables simple motherboard hookup
  • Sleeve bearing runs quietly at idle
  • Square cooler design directs airflow over CPU

Compact 60 mm square cooler

The OEM Industries KD1206PHS2 is a 60 mm square fan designed for direct CPU or case cooling. It runs on 12 V and draws 1.9 W through a two-pin power connector. A sleeve bearing keeps the assembly simple and cost-effective.

Suits tight spaces and low-power builds

This cooler fits small-form-factor chassis or legacy sockets where a 60 mm footprint is required. Builders needing higher airflow, PWM speed control or quiet operation at load should consider larger alternatives.

Mounts in standard 60 mm cut-outs

The fan installs in any 60 mm square mounting pattern without additional brackets. Its two-pin lead connects directly to a motherboard header or fan controller, leaving four-pin headers free for PWM devices. No LED lighting means no extra cables to route.

Pluspunten

  • Compact 60 mm frame fits tight chassis
  • 12 V 1.9 W draw keeps power use low
  • Two-pin connector enables simple motherboard hookup
  • Sleeve bearing runs quietly at idle
  • Square cooler design directs airflow over CPU

Specificaties

ModelKD1206PHS2
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Vragen over dit artikel

Does my motherboard need a 2-pin fan header to run the KD1206PHS2 cooler?

Yes, the cooler uses a 2-pin power connector, so your board must provide a matching 2-pin fan header.

Will the 60 mm square frame of this cooler clear the mounting holes on my older socket board?

The cooler has a 60 mm square footprint; check your board’s mounting-hole spacing against those dimensions before installing.

How can I confirm the 12 V 1.9 W fan is spinning correctly after I fit it?

Power the system and verify the fan rotates; you can also monitor the fan speed in the BIOS or a hardware-monitoring utility.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.