Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Ten black 92 by 25 mm maglev CPU fans with four-pin connectors

OEM Industries

OEM Industries KDE1209PTVX CPU cooler 92×25 mm 12 V 4.4 W 4-pin maglev 8-hole 10 pcs

SKU CH-XRQY-0JHGH

Ten 92 × 25 mm maglev fans with 4-pin PWM control and eight-hole mounting

  • ColorBlack
  • TypeFan only
  • Bearing TypeMgalev
  • Power Connector4 Pin
  • LEDNo
  • Maglev bearing reduces friction for quieter operation
  • 12 V 4.4 W PWM fan delivers precise speed control
  • 92 × 25 mm frame fits standard 8-hole mounts
  • Ten fans included for multi-system or spare coverage
  • SUNON KDE1209PTVX model built for reliable CPU cooling

Purpose-built cooling pack

This lot supplies ten identical 92 mm maglev fans rated at 12 V and 4.4 W each. The 4-pin PWM connectors allow direct motherboard control for CPU air coolers or case ventilation. Builders who need multiple matching units for a cluster or a spare-part stash can deploy them immediately. Buyers who want a single fan or a different frame size should look elsewhere.

Thermal and acoustic profile

Maglev bearings reduce mechanical friction so the fans run quietly at low duty cycles while still moving air through a 92×25 mm frame. The 4.4 W draw per unit keeps total power demand modest even when all ten spin at full speed. PWM signalling lets the system taper voltage as temperatures drop, cutting noise without extra wiring. No LED lighting means no stray glow in dark chassis.

Integration notes

Each fan uses an 8-hole mounting pattern that matches standard 92 mm CPU cooler brackets and case fan grilles. The 4-pin plugs fit any PWM header, so no adapter cables are required. Ten units fill a multi-node rack or provide long-term replacements for identical coolers. Builders needing 120 mm frames, 3-pin voltage control or addressable RGB will not be served by this pack.

Pluspunten

  • Maglev bearing reduces friction for quieter operation
  • 12 V 4.4 W PWM fan delivers precise speed control
  • 92 × 25 mm frame fits standard 8-hole mounts
  • Ten fans included for multi-system or spare coverage
  • SUNON KDE1209PTVX model built for reliable CPU cooling

Specificaties

ModelKDE1209PTVX
ColorBlack
TypeFan only
Bearing TypeMgalev
Power Connector4 Pin
LEDNo

Vragen over dit artikel

How do I install the 92 mm maglev fan using the 8 mounting holes?

Align the fan's 8-hole pattern with the CPU cooler bracket, insert screws through all holes, and tighten evenly; the step often missed is confirming the 4-pin PWM connector seats fully so speed control works.

What maintenance will the maglev bearing need over time?

The Mgalev bearing is contact-free, so no lubrication is required; simply blow dust from the blades and frame every few months to keep airflow at the rated 4.4 W level.

What limit appears first when the fan runs continuously at 12 V?

Sustained operation at the rated 4.4 W power draw makes motor-temperature rise the first limiting factor; ensure case airflow removes heat so the maglev assembly stays within its thermal envelope.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.