Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 55mm square fan 10mm thick four-pin connector

OEM Industries

OEM Industries MGT6012YR-W10 55mm 12V 0.30A 3500rpm 4-pin CPU cooler

SKU CH-246F-1VC2T MPN MGT6012YR-W10

A 55 mm ball-bearing fan with 4-pin PWM control spins at 3500 rpm from a 12 V 0.30 A supply

  • ColorBlack
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • Compact 55 mm frame fits tight GPU heatsinks
  • Ball bearing rated for long continuous operation
  • 3500 rpm delivers strong targeted airflow
  • 4-pin PWM connector enables precise speed control
  • Low 0.30 A draw minimises power load

Compact 55 mm replacement fan

The OEM Industries MGT6012YR-W10 is a 55 mm square fan designed as a direct drop-in for graphics-card coolers that use the same mounting pattern. It runs on 12 V at 0.30 A and spins at 3500 rpm to move air through tight heatsink fins.

Ball-bearing build with 4-pin control

Ball bearings give consistent rotation over long duty cycles without the wear patterns of sleeve designs. The 10 mm thickness and 43 x 32 x 39 mm screw-hole spacing match the original MAGIC cooler layout so no adapter brackets are needed. A 4-pin connector supplies PWM speed control and tachometer feedback to the GPU fan header.

Swaps a worn or noisy OEM blower

Install when the factory fan develops bearing rattle, drops below rated speed, or fails completely. The identical footprint and voltage restore stock cooling performance without modifying the shroud or BIOS fan curve. Not suited for builds that need a larger-frame fan, higher static pressure, or addressable lighting.

Pluspunten

  • Compact 55 mm frame fits tight GPU heatsinks
  • Ball bearing rated for long continuous operation
  • 3500 rpm delivers strong targeted airflow
  • 4-pin PWM connector enables precise speed control
  • Low 0.30 A draw minimises power load

Specificaties

ModelMGT6012YR-W10
ColorBlack
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Vragen over dit artikel

What does the 4-pin connector on the MGT6012YR-W10 allow the motherboard to control?

The 4-pin PWM connector lets the motherboard vary the fan speed up to 3500 rpm based on CPU temperature.

Will the 55 mm fan with 43x32x39 mm screw spacing fit my graphics card heatsink?

Measure the existing fan mounting holes; this unit needs a 43 mm by 32 mm by 39 mm rectangular pattern and 10 mm thickness.

How do I install the MGT6012YR-W10 without damaging the ball bearing?

Hold the fan by its frame, align the four screws with the 43x32x39 mm holes, and tighten evenly — do not press on the rotor hub.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.