Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 60mm square fan with 3-pin connector

OEM Industries

OEM Industries MMF-06D24DS RC1 60mm 24V 3-pin CPU cooler

SKU CH-SJZ8-DBMQ0

60 mm square fan with ball bearing, 24 V 0.08 A three-pin power, no LED, suited for server or inverter cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 60 mm square frame fits tight 1U server bays
  • 24 V 0.08 A draw keeps inverter power budgets low
  • Ball bearing spindle resists wear in continuous duty cycles
  • Three-pin connector reports speed to BMC monitoring
  • 6025 form factor matches ABB and Fanuc replacement specs

Compact 60 mm 24 V server fan

The OEM Industries MMF-06D24DS RC1 is a 60 mm square fan built for 24 V DC systems such as inverters, ABB drives and Fanuc servers. It suits technicians maintaining industrial enclosures that require a 6025 form-factor replacement.

Ball-bearing 3-pin connection

Ball bearings provide durable rotation in continuous-duty environments. The 3-pin, 3-wire lead delivers power and a tachometer signal so the host controller can monitor speed without extra wiring.

24 V 0.08 A power rating

The unit draws 0.08 A at 24 V, a fixed electrical envelope that determines whether it matches the inverter or server rail. Builders using 12 V or 5 V rails cannot use this fan.

Pluspunten

  • 60 mm square frame fits tight 1U server bays
  • 24 V 0.08 A draw keeps inverter power budgets low
  • Ball bearing spindle resists wear in continuous duty cycles
  • Three-pin connector reports speed to BMC monitoring
  • 6025 form factor matches ABB and Fanuc replacement specs

Specificaties

ModelMMF-06D24DS RC1
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Vragen over dit artikel

How often should the ball bearing in this 60 mm fan be checked or replaced?

Ball bearings in a 60 mm fan like this typically run for tens of thousands of hours; inspect for noise or vibration once a year and replace only if roughness appears.

What thermal limit appears first when this 24 V 0.08 A cooler runs continuously?

The motor winding temperature will reach its design ceiling before the ball bearing or frame shows stress, so sustained airflow keeps it within spec.

How much noise and heat does this 3-pin 6025 fan produce during all-day operation?

At 24 V and 0.08 A it draws under 2 W, so acoustic output stays low and the housing barely warms above ambient in a server chassis.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.