Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 9 cm square axial fan with three-wire connector

OEM Industries

OEM Industries MMF-09C24TS RM1 9CM 24V 3-Pin Fan

SKU CH-MY2W-0TPDY

A 9 cm 24 V 3-pin fan with dual ball bearings for PLC and inverter equipment

  • ColorBlack
  • TypeFan only
  • Fan Size9CM
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • LEDNo
  • Original Melco build ensures industrial-grade reliability
  • 9 cm frame fits standard 90 × 25 mm mounting holes
  • Dual ball bearing extends service life under continuous duty
  • 24 V 0.2 A rating matches PLC and inverter power rails
  • Three-pin connector provides tachometer feedback for speed monitoring

Industrial 9 CM Cooling Fan

This new 9 cm fan from OEM Industries runs on 24 V at 0.2 A and uses a three-pin connector. It is built with dual ball bearings for continuous operation in PLC and inverter cabinets such as ABB and Yaskawa units. The compact 90 by 25 mm frame fits tight equipment enclosures. No LEDs are fitted.

Control-Cabinet Integrators

Engineers maintaining ABB or Yaskawa drives can drop this Melco-spec replacement straight into the existing wiring harness. It is not suited for standard PC motherboard headers that expect PWM control or 12 V operation. Buyers needing variable-speed thermal management for a desktop CPU should look elsewhere.

Panel-Mount Airflow Component

The three-wire lead provides tachometer feedback so the host controller can monitor rotor speed. No separate fan controller or external power supply is required beyond the 24 V rail already present in the cabinet. The 25 mm depth leaves room for dense component stacking. Mounting hardware is not included.

Pluspunten

  • Original Melco build ensures industrial-grade reliability
  • 9 cm frame fits standard 90 × 25 mm mounting holes
  • Dual ball bearing extends service life under continuous duty
  • 24 V 0.2 A rating matches PLC and inverter power rails
  • Three-pin connector provides tachometer feedback for speed monitoring

Specificaties

ModelMMF-09C24TS RM1
ColorBlack
TypeFan only
Fan Size9CM
Bearing Type2 Ball
Power Connector3 Pin
LEDNo

Vragen over dit artikel

What 24 V power source with a 3-pin header is needed to run this 90 mm Melco fan?

A 24 V DC supply rated for at least 0.2 A and a matching 3-pin connector will power the MMF-09C24TS RM1.

Can this 9 cm ball-bearing fan replace the original cooler on an ABB or Yaskawa inverter?

Yes, the MMF-09C24TS RM1 is built as a direct 90×25 mm replacement for those PLC inverter units.

How do I confirm the fan is spinning correctly after installation?

Verify the tach signal on the third pin reports a steady RPM and listen for smooth, vibration-free rotation from the dual ball bearings.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.