Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small black 40mm square cooling fan with two power wires

OEM Industries

OEM Industries MW-410H05C 40mm 5V 0.22A 2-Pin CPU cooler

SKU CH-MEK4-8E6DN

A compact 40 mm CPU air cooler with a 5 V, 0.22 A two-pin fan and ball bearing for notebook or small-form-factor systems

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • Compact 40 mm frame fits tight notebook chassis
  • 5 V 0.22 A draw keeps power use low
  • Ball bearing design extends operational life
  • Two-pin connector enables simple installation
  • Fan-only unit weighs little for portable builds

Compact 40 mm Cooling Fan

The OEM Industries MW-410H05C is a 40 mm by 10 mm axial fan built for tight spaces such as notebook chassis, small-form-factor desktops or embedded systems. It runs on a 5 V supply drawing 0.22 A through a two-pin connector and uses a ball-bearing motor for reliable rotation. The black frame and blade assembly contain no lighting.

Suited for Low-Power Thermal Slots

This unit suits repair technicians and system integrators who need a direct replacement for a 40 mm two-pin fan in legacy laptops, thin clients or industrial boards. Builders requiring higher airflow, PWM speed control, a three- or four-pin header or larger frame dimensions should look at alternative cooling solutions.

5 V Two-Pin Power Interface

The cooler connects via a standard two-pin header delivering 5 V at 0.22 A, so the target device must provide that exact voltage and connector layout. Verify the header pinout and available mounting holes before installation to ensure mechanical and electrical compatibility.

Pluspunten

  • Compact 40 mm frame fits tight notebook chassis
  • 5 V 0.22 A draw keeps power use low
  • Ball bearing design extends operational life
  • Two-pin connector enables simple installation
  • Fan-only unit weighs little for portable builds

Specificaties

ModelMW-410H05C
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

Vragen over dit artikel

How do I connect the 2-pin plug to a 5V header without reversing polarity?

Align the two wires with the 5V and ground pins on the header; the connector only fits one way, so press it straight down until seated.

When will the ball bearing need replacement?

The ball bearing is rated for continuous operation; expect to replace the fan when noise or vibration increases after extended use.

What thermal limit appears first during sustained load on this 40mm cooler?

The 5V 0.22A motor reaches its maximum airflow ceiling before the heatsink saturates, so temperatures rise once the fan hits peak RPM.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.