Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small black 4-pin GPU cooling fan with ball bearing

OEM Industries

OEM Industries PLD08010B12HH 12V .35A 4 Pin GPU Fan

SKU CH-HE8J-RMMRY

Replacement fan for compatible graphics cards, 12 V, 0.35 A, 4-pin connector, ball bearing

  • ColorBlack
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • Compatible with HD 7850 and HD 7870 cards
  • Compatible with HD 7950 graphics models
  • Ball bearing for durable operation
  • 4-pin PWM connector enables speed control
  • 12 V 0.35 A power specification

4-Pin Ball-Bearing Fan for Select AMD Cards

The OEM Industries PLD08010B12HH is a 12V 0.35A replacement cooler designed for specific video cards. It uses a ball bearing and a four-wire power connector for speed control. The unit comes in black and contains the fan assembly only. Three mounting holes are provided on each side for installation.

Suits Owners of Listed R7 and HD Models

This fan matches the R7850, HD7850, R7950, HD7950, R7870 and HD7870 models referenced by the supplier. It is not for builders needing a heatsink assembly or a different mounting pattern. Buyers with other graphics cards should verify compatibility before purchasing. The lack of LEDs makes it suitable for non-illuminated builds.

Four-Wire 12V Connector Determines Fit

The 4-pin 12V 0.35A power connector is the single specification that decides whether this part works with a given card. A three-pin or two-pin header will not provide the required control signal. Confirm the card uses this exact connector type before ordering. No other electrical interface is supported by this unit.

Pluspunten

  • Compatible with HD 7850 and HD 7870 cards
  • Compatible with HD 7950 graphics models
  • Ball bearing for durable operation
  • 4-pin PWM connector enables speed control
  • 12 V 0.35 A power specification

Specificaties

ModelPLD08010B12HH
ColorBlack
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Vragen over dit artikel

Does my graphics card need a 12 V four-pin header for this replacement fan?

Yes, the fan draws 0.35 A from a 12 V four-pin connector, so the card must provide that header.

Will the three mounting holes on this fan line up with the cooler on my HD 7850, HD 7870 or HD 7950?

The supplier lists those models as compatible and notes three mounting holes per side for the Twins cooler.

How can I confirm the new fan is running correctly after installation?

Check that the 4-pin PWM signal reports a stable RPM in your monitoring software and that the ball bearing spins without noise.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.