Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 70mm square CPU cooling fan with 3-pin connector

OEM Industries

OEM Industries R127020DL 70mm 12V .2A 3-Pin CPU cooler

SKU CH-XT9R-GEQNF MPN R127020DL

A 70 mm ball-bearing fan runs on 12 V and 0.2 A through a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • 70 mm compact frame fits tight CPU sockets
  • Ball bearing design reduces friction for longer service life
  • 12 V, 0.2 A power draw keeps system load low
  • 3-pin connector enables direct motherboard speed control
  • 20 mm thickness suits low-profile chassis builds

Compact 70 mm replacement fan

The OEM Industries R127020DL is a 70 mm square frame fan designed to fit legacy CPU coolers or tight chassis locations. It spins on a ball bearing at twelve volts drawing point two amps and connects through a standard three pin header.

Builders needing a direct 7020 swap

This unit suits anyone replacing a failed seventy millimetre cooler fan where the original mounting holes line up with the seventy by seventy by twenty millimetre footprint. It will not help users who require a full heatsink assembly PWM speed control or larger airflow capacity.

Three pin twelve volt power draw

The decisive figure is the point two ampere current rating at twelve volts on a three pin connector; verify that your motherboard header can supply this current before ordering.

Pluspunten

  • 70 mm compact frame fits tight CPU sockets
  • Ball bearing design reduces friction for longer service life
  • 12 V, 0.2 A power draw keeps system load low
  • 3-pin connector enables direct motherboard speed control
  • 20 mm thickness suits low-profile chassis builds

Specificaties

ModelR127020DL
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeBall
Power Connector3 Pin

Vragen over dit artikel

Is this the 70 mm 12 V .2 A 3-pin version or a different size and voltage?

This is the 70 mm model R127020DL that runs on 12 V at .2 A with a 3-pin connector.

What does the .2 A current draw mean for everyday cooling performance?

At .2 A on a 12 V rail the fan draws modest power while its ball-bearing motor spins the 70 mm blades to move air across the heatsink.

Will the 3-pin connector work with a standard motherboard CPU fan header and what control does it allow?

The 3-pin plug fits any standard 3-pin or 4-pin CPU fan header; the motherboard can monitor speed via the tach wire and vary voltage for basic speed control.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.