Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 80mm ball-bearing cooling fan with two power wires

OEM Industries

OEM Industries SF8025AT 80mm Ball Bearing Fan 3000-3499rpm 35-40dBA 2-Wire

SKU CH-2C06-820FN

An 80mm ball-bearing fan delivering 80cfm airflow at 3000-3499rpm with a 35-40dBA noise level

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector2 Wires
  • LEDNo
  • 80mm frame fits tight chassis spaces
  • Ball bearing runs 3000-3499 rpm for 80 cfm airflow
  • Noise rated 35-40 dBA keeps systems quiet
  • Two-wire 110-120 VAC power simplifies wiring
  • New condition ensures full rated performance

80mm AC fan for industrial cooling

The OEM Industries SF8025AT is an 80mm frame fan that runs directly from 110 to 120 VAC mains at 50 to 60 Hz. It draws 0.1 A through a two-wire lead and uses a ball bearing for continuous-duty rotation in server, appliance or equipment chassis.

3000 to 3499 rpm airflow with 35 to 40 dBA noise

At full speed the fan delivers 80 CFM of air movement, which is sufficient for dense component layouts or restricted vent paths. The acoustic output stays between 35 and 40 dBA, so it remains audible in quiet office spaces but acceptable in typical rack or factory environments.

110 to 120 VAC two-wire power requirement

This unit requires a line-voltage AC supply and a two-wire connection; it cannot be powered from a standard 12 VDC motherboard header or four-pin PWM connector. Builders needing low-voltage DC control or variable-speed headers must select a different model.

Pluspunten

  • 80mm frame fits tight chassis spaces
  • Ball bearing runs 3000-3499 rpm for 80 cfm airflow
  • Noise rated 35-40 dBA keeps systems quiet
  • Two-wire 110-120 VAC power simplifies wiring
  • New condition ensures full rated performance

Specificaties

ModelSF8025AT
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector2 Wires
LEDNo

Vragen over dit artikel

Will the 80mm frame fit the mounting holes on my existing 80mm heatsink?

The fan uses the standard 80mm square frame, so it aligns with the four mounting holes found on most 80mm heatsinks and cases.

How can I confirm the fan is spinning at the rated 3000-3499rpm after installation?

Connect the two wires to a 110-120VAC 50-60Hz supply and check the RPM reading in your BIOS or monitoring software; it should report within the 3000-3499rpm range.

Does the box include mounting screws or a power adapter for the 2-wire leads?

The package contains the fan unit only; mounting screws and any required AC wiring or connector must be sourced separately.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.