Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR4 memory module with gold edge connectors and black chips, no heat spreader

OWC

OWC 128GB DDR4 2933 CL21 4Rx4 288-pin 1.2V ECC LRDIMM HP Synergy 480 660 Gen10

SKU CH-BAYW-C1TJ1

A 128 GB DDR4 2933 ECC load-reduced DIMM for HP Synergy 480 Gen10 and 660 Gen10 servers

  • Capacity128GB
  • Type288-Pin DDR4 ECC LRDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 128GB

  • 128 GB capacity expands server memory headroom
  • DDR4 2933 MHz speed delivers high data throughput
  • ECC load-reduced design maintains signal integrity at scale
  • 2 V operation reduces power draw per module
  • Compatible with HP Synergy 480 Gen10 and 660 Gen10

128GB DDR4 2933 ECC LRDIMM for HP Synergy

This 128GB DDR4 2933 CL21 4Rx4 288-pin 1.2V ECC Load Reduced DIMM is built for HP Synergy 480 Gen10 and 660 Gen10 servers. It targets administrators who need maximum capacity per slot in dense compute modules running virtualisation or database workloads.

Fits HP Synergy compute modules.

The module fits 288-pin DDR4 slots in Synergy 480 Gen10 and 660 Gen10 bays and must not be mixed with unbuffered or registered ECC DIMMs. Backward compatibility with 2133, 2400 and 2666MHz bus speeds lets it slot into existing memory configurations without a full refresh.

Sustained load behaviour

Load-reduced buffering lowers electrical load on the memory controller so all ranks stay active during long-running jobs. ECC corrects single-bit errors on the fly, keeping data integrity intact through extended uptime. 1.2V operation limits thermal output while the module runs at its rated 2933MHz speed.

Pluspunten

  • 128 GB capacity expands server memory headroom
  • DDR4 2933 MHz speed delivers high data throughput
  • ECC load-reduced design maintains signal integrity at scale
  • 2 V operation reduces power draw per module
  • Compatible with HP Synergy 480 Gen10 and 660 Gen10

Specificaties

BrandOWC
Part Number2L9D44R4128G
Capacity128GB
Type288-Pin DDR4 ECC LRDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
Heat SpreaderNo
Compatible SystemHP Synergy 480 Gen10
HP Synergy 660 Gen10

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will a single 128GB 4Rx4 module hit the rank-per-channel limit on the Synergy 480 Gen10?

Each 4Rx4 LRDIMM presents four logical ranks to the memory controller; the Synergy 480 Gen10 supports up to eight ranks per channel, so one module leaves headroom for a second DIMM in the same channel.

How much heat does the 1.2V 2933MHz LRDIMM generate under continuous load?

At 1.2V the module draws minimal power; load-reduced buffering reduces electrical loading on the bus, so sustained operation stays within normal server DIMM thermal limits without a heat spreader.

Which HP Synergy compute module must already be installed for this memory to work?

This DDR4 2933 ECC LRDIMM is validated for the HP Synergy 480 Gen10 and 660 Gen10 compute modules; one of those must be present in the frame.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.