Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green circuit boards with gold contacts and black chips side by side

OWC

OWC 16GB (2x8GB) DDR3 1333 ECC Registered RDIMM Kit SuperServer 6036T 6046T 7046A 7046GT 7046T

SKU CH-Z29H-GWMB2

16 GB DDR3 ECC registered RDIMM kit for Supermicro SuperServer 6036T, 6046T, 7046A, 7046GT and 7046T series

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design prevents data errors in critical workloads
  • 16 GB kit (2 × 8 GB) expands server memory capacity
  • DDR3 1333 PC3-10600 CL9 matches Supermicro SuperServer specifications
  • 5 V 240-pin RDIMM fits 6036T 6046T 7046A 7046GT 7046T series
  • Replaces Supermicro MEMDR380 part numbers for drop-in upgrades

16GB DDR3 1333 ECC Registered Kit

This OWC kit supplies 16 GB of DDR3 1333 memory in two 8 GB registered DIMMs. It is built for the Supermicro SuperServer 6036T, 6046T, 7046A, 7046GT and 7046T series. The modules run at 1.5 V with CL9 latency and 2Rx4 organisation.

Suits servers needing registered ECC DDR3.

The registered ECC design works only in workstation and server platforms that accept registered memory. It will not operate in standard desktop boards and cannot be mixed with unbuffered modules. Buyers whose systems require unbuffered or non-ECC DDR3 must choose a different kit.

Registered ECC DDR3 decides compatibility

Registered ECC DDR3 is the single specification that determines whether this kit fits. The motherboard must support registered error-correcting DDR3 DIMMs; otherwise the modules will not post. Verify the server documentation before purchase.

Pluspunten

  • ECC registered design prevents data errors in critical workloads
  • 16 GB kit (2 × 8 GB) expands server memory capacity
  • DDR3 1333 PC3-10600 CL9 matches Supermicro SuperServer specifications
  • 5 V 240-pin RDIMM fits 6036T 6046T 7046A 7046GT 7046T series
  • Replaces Supermicro MEMDR380 part numbers for drop-in upgrades

Specificaties

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 6036T Series
Supermicro SuperServer 6046T Series
Supermicro SuperServer 7046A Series
Supermicro SuperServer 7046GT Series
Supermicro SuperServer 7046T Series

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does the 1333 MHz DDR3 speed limit throughput once the SuperServer runs sustained workloads?

The kit runs at DDR3 1333 (PC3-10600) with CL9 latency; that bus speed is the maximum data rate the modules can deliver under continuous load.

How much heat and power do the two 8 GB registered DIMMs add when the server runs all day?

Each module operates at 1.5 V with no heat spreader; registered ECC DIMMs of this density typically draw only a few watts and add minimal thermal load.

Which Supermicro SuperServer series must I already own for this 240-pin kit to work?

The kit is validated for SuperServer 6036T, 6046T, 7046A, 7046GT and 7046T series; it will not fit standard desktop boards.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.