Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green printed circuit board with black memory chips in a single row along one side, gold edge connector at bottom, no heat spreader

OWC

OWC 16GB DDR4 2400 CL17 2Rx8 288-pin 1.2V Non-ECC UDIMM for QNAP TS-1677X TS-432PXU TS-432XU

SKU CH-MD0V-D0CR3

16GB DDR4 2400 CL17 UDIMM module upgrades QNAP TS-1677X, TS-432PXU and TS-432XU systems

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • 16 GB capacity expands NAS memory for heavier workloads
  • DDR4 2400 MHz speed delivers responsive data access
  • CL17 latency keeps timing tight for smooth operation
  • 2 V low voltage reduces power draw and heat
  • 288-pin UDIMM fits QNAP TS-1677X, TS-432PXU and TS-432XU models

System-Specific DDR4 Upgrade

This OWC memory module is built for QNAP NAS models TS-1677X, TS-432PXU, TS-432PXU-RP, TS-432XU and TS-432XU-RP. It provides a single 16GB DDR4 2400 CL17 2Rx8 288-pin 1.2V Non-ECC UDIMM to expand system memory capacity.

JEDEC DDR4 2400 CL17 Specification

The module runs at DDR4 2400 (PC4-19200) with CAS latency 17 and 1.2V operation. It is unbuffered, non-ECC, dual-rank 2Rx8 and fully JEDEC compliant. Backward compatibility with 2133MHz systems is supported.

Low-Voltage Unbuffered Operation

At 1.2V the module draws minimal power and generates little heat without a spreader. Unbuffered design keeps electrical loading light for stable operation in the listed QNAP NAS units during continuous workloads.

Pluspunten

  • 16 GB capacity expands NAS memory for heavier workloads
  • DDR4 2400 MHz speed delivers responsive data access
  • CL17 latency keeps timing tight for smooth operation
  • 2 V low voltage reduces power draw and heat
  • 288-pin UDIMM fits QNAP TS-1677X, TS-432PXU and TS-432XU models

Specificaties

BrandOWC
Part Number2U4D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-1677X
QNAP TS-432PXU
QNAP TS-432PXU-RP
QNAP TS-432XU
QNAP TS-432XU-RP

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 2400MHz speed run at full rate in my TS-432XU?

The module is rated at DDR4 2400 PC4-19200 CL17 and will operate at that speed if the NAS memory controller supports it; otherwise it will downshift to 2133MHz automatically.

Is the 288-pin DDR4 UDIMM the correct form factor for the TS-1677X?

Yes, this is a 288-pin unbuffered non-ECC DDR4 UDIMM, which matches the slot type used in the listed QNAP models.

Does the 16GB stick need a heat spreader to fit inside the TS-432PXU?

No heat spreader is fitted, so the low-profile module clears standard NAS DIMM sockets without clearance issues.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.