Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green PCB memory module with black chips, low-profile height, 288 gold pins, no heat spreader

OWC

OWC 16GB DDR4 2666 ECC VLP UDIMM CL19 1.2V 2Rx8 288-pin 2E6V42R816GB

SKU CH-9SRF-RMGJP

A 16GB DDR4 2666 ECC VLP UDIMM for Supermicro X11SCD-F, X11SCE-F, X11SCL-LN4F, X11SCM-F and X11SCM-LN8F motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC VLP UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • 16 GB DDR4 ECC UDIMM adds capacity for multitasking
  • 2666 MT/s CL19 timing supports responsive system operation
  • 2 V low-voltage design reduces power draw
  • Very low profile height fits tight chassis spaces
  • Validated for Supermicro X11SCD-F, X11SCE-F, X11SCL-LN4F, X11SCM-F, X11SCM-LN8F

Targeted 16GB DDR4 ECC upgrade

This single 16GB DDR4 2666 module is built for Supermicro X11SCD-F, X11SCE-F, X11SCL-LN4F, X11SCM-F and X11SCM-LN8F motherboards. It adds ECC protection and 2Rx8 density to servers or workstations that need reliable capacity without registered buffering.

VLP unbuffered design for dense layouts

The very-low-profile height clears tight CPU coolers and 1U chassis where standard DIMMs cannot fit. JEDEC-standard 1.2V operation and 288-pin unbuffered layout mean it drops into existing slots without BIOS tuning or extra power headroom.

Replaces non-ECC or lower-capacity sticks

Swapping older non-ECC UDIMMs for this module adds error correction and doubles per-slot density in one step. The jump is worth it when workloads demand data integrity and the board supports unbuffered ECC at 2666 MT/s.

Pluspunten

  • 16 GB DDR4 ECC UDIMM adds capacity for multitasking
  • 2666 MT/s CL19 timing supports responsive system operation
  • 2 V low-voltage design reduces power draw
  • Very low profile height fits tight chassis spaces
  • Validated for Supermicro X11SCD-F, X11SCE-F, X11SCL-LN4F, X11SCM-F, X11SCM-LN8F

Specificaties

BrandOWC
Part Number2E6V42R816GB
Capacity16GB
Type288-Pin DDR4 ECC VLP UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11SCD-F
Supermicro Motherboard X11SCE-F
Supermicro Motherboard X11SCL-LN4F
Supermicro Motherboard X11SCM-F
Supermicro Motherboard X11SCM-LN8F

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does DDR4 2666 PC4-21300 run at its rated speed on Supermicro X11SCM-F?

The module is rated DDR4 2666 PC4-21300 and will operate at that speed when the motherboard memory controller supports 2666 MT/s.

Will the 288-pin VLP UDIMM fit the DIMM slots on Supermicro X11SCL-LN4F?

Yes, the 288-pin VLP UDIMM form factor matches the standard DDR4 DIMM slots on the listed Supermicro boards.

What is the correct way to seat this ECC UDIMM and what step is often missed?

Align the notch with the slot key, press down firmly until both retention clips click, then verify the module height clears the CPU cooler.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.