Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold edge connectors

OWC

OWC 2R1D42R416GB 16GB DDR4 2133MHz CL15 ECC Registered RDIMM memory upgrade

SKU CH-27ZZ-HGVRH

16 GB DDR4 ECC registered DIMM running at 2133 MHz CL15 for Supermicro X10 server boards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCYes
  • 16 GB capacity lets you run larger workloads
  • DDR4 2133 MHz CL15 delivers responsive server performance
  • ECC registered design protects data integrity in critical tasks
  • 2 V operation reduces power draw and heat
  • Validated for Supermicro X10 motherboards including X10OBi-CPU and X10SDV-12C-TLN4F

ECC Registered DDR4 for Supermicro Servers

This 16GB DDR4 2133MHz CL15 module is built for Supermicro X10 series motherboards including X10OBi-CPU, X10QBi, X10QBL-4, X10QBL-4CT and X10SDV-12C-TLN4F. It delivers error-correcting registered memory for workstation and server workloads. The 288-pin RDIMM operates at 1.2V with a 2Rx4 rank configuration.

Registered DIMM Limits

Registered ECC memory cannot be mixed with unbuffered modules and will not function in standard desktop platforms. The DDR4 2133MHz interface sets the maximum data rate for this module. System memory speed will follow the lowest rated DIMM or the processor memory controller limit.

Motherboard Slot Check

Verify your board is one of the five listed Supermicro models before ordering. Confirm the DIMM slots support 288-pin DDR4 RDIMMs and that the BIOS revision allows 16GB registered modules. Do not install this memory in consumer desktop or unbuffered-only systems.

Pluspunten

  • 16 GB capacity lets you run larger workloads
  • DDR4 2133 MHz CL15 delivers responsive server performance
  • ECC registered design protects data integrity in critical tasks
  • 2 V operation reduces power draw and heat
  • Validated for Supermicro X10 motherboards including X10OBi-CPU and X10SDV-12C-TLN4F

Specificaties

BrandOWC
Part Number2R1D42R416GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10OBi-CPU
Supermicro Motherboard X10QBi
Supermicro Motherboard X10QBL-4
Supermicro Motherboard X10QBL-4CT
Supermicro Motherboard X10SDV-12C-TLN4F

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Should I choose the 16GB module or add multiple 16GB modules for my Supermicro X10 motherboard?

Each module provides 16GB of DDR4 2133MHz ECC Registered memory. Add as many 16GB modules as your Supermicro X10 motherboard's DIMM slots and maximum capacity allow.

What does the PC4-17000 rating mean when the module is installed in a Supermicro X10 server?

PC4-17000 indicates a peak transfer rate of 17000 MB/s at 2133MHz. In your Supermicro X10 system the module will run at this speed with CL15 latency and 1.2V operation.

How does the 288-pin DDR4 ECC Registered interface affect compatibility with Supermicro X10 boards?

The 288-pin DDR4 ECC Registered RDIMM form factor fits only server and workstation boards that support registered memory. It is validated for Supermicro X10OBi-CPU, X10QBi, X10QBL-4, X10QBL-4CT and X10SDV-12C-TLN4F motherboards.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.