Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green printed circuit board with black memory chips and gold edge connectors

OWC

OWC 2R9D42R464GB 64GB DDR4 2933 ECC RDIMM memory upgrade

SKU CH-XH72-6WWQF

A 64GB DDR4 2933 ECC registered RDIMM for HP ProLiant DL160, DL180, DL380, DX170r and XL450 Gen10 servers

  • Capacity64GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 64GB

  • 64GB single module expands server memory capacity
  • DDR4 2933 speed with CL21 latency boosts data throughput
  • ECC registered design detects and corrects memory errors
  • 2V low voltage reduces power draw and heat
  • Compatible with HP ProLiant DL160 Gen10 DL180 Gen10 DL380 Gen10 Carrier Grade DX170r Gen10 XL450 Gen10

64GB DDR4 ECC RDIMM for HP ProLiant

This 64GB DDR4 2933 ECC registered DIMM is built for HP ProLiant Gen10 servers including the DL160, DL180, DL380 Carrier Grade, DX170r and XL450. It operates at 1.2V with CL21 latency and a 2Rx4 rank configuration. The module replaces multiple original HP part numbers for a direct upgrade path.

Suited for ECC registered server slots.

This memory fits servers and workstations that require ECC registered DDR4 DIMMs. It will not work in standard desktop computers or systems that use unbuffered or load-reduced ECC modules. Mixing it with those types is not supported and can prevent boot or cause instability.

Single 64GB module at 2933 MT/s

One module delivers 64GB of capacity at the rated 2933 MT/s speed. The DIMM is backward compatible with 2133, 2400 and 2666 MT/s bus speeds, allowing it to run in older DDR4 server platforms. Total system capacity depends on the number of available DIMM slots and the server model's maximum memory limit.

Pluspunten

  • 64GB single module expands server memory capacity
  • DDR4 2933 speed with CL21 latency boosts data throughput
  • ECC registered design detects and corrects memory errors
  • 2V low voltage reduces power draw and heat
  • Compatible with HP ProLiant DL160 Gen10 DL180 Gen10 DL380 Gen10 Carrier Grade DX170r Gen10 XL450 Gen10

Specificaties

BrandOWC
Part Number2R9D42R464GB
Capacity64GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant DL160 Gen10
HP ProLiant DL180 Gen10
HP ProLiant DL380 Gen10 Carrier Grade
HP ProLiant DX170r Gen10
HP ProLiant XL450 Gen10

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Which HP ProLiant server models must I already own for this 288-pin 64GB DDR4 2933 ECC RDIMM to work?

The module is validated for HP ProLiant DL160 Gen10, DL180 Gen10, DL380 Gen10 Carrier Grade, DX170r Gen10 and XL450 Gen10 servers.

Will this CL21 1.2V registered DIMM run alongside older 2133MHz or 2400MHz DDR4 modules I keep in the same server?

Yes, the module is backward compatible with 2133MHz, 2400MHz and 2666MHz DDR4 speeds, so it will downclock to match existing DIMMs.

How can I confirm the 2Rx4 ECC registered module is detected at 2933MHz after installation?

Check the server BIOS or iLO interface; it should show the new 64GB DIMM running at 2933MHz with ECC registered status.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.