Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR3L ECC registered DIMMs in antistatic tray

OWC

OWC 32GB (4x8GB) DDR3L 1600 CL11 ECC RDIMM SuperBlade 7127R 7142G 7427R

SKU CH-15BJ-3VBAR

32 GB kit of four 8 GB DDR3L 1600 ECC registered DIMMs for Supermicro SuperBlade 7127R, 7142G and 7427R servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • 32 GB capacity from four 8 GB modules expands server memory
  • DDR3L 1600 CL11 at 1.35 V lowers power draw per module
  • ECC registered design protects data integrity in SuperBlade systems
  • 240-pin RDIMM form factor fits 7127R 7142G 7427R blade servers
  • Replaces Supermicro MEMDR380LHL07ER16 MEMDR380LSL10ER16 MEMDR380LSL14ER16 MEMDR380LSV04ER16

Compatible Supermicro SuperBlade Models

This 32 GB kit contains four 8 GB DDR3L 1600 ECC registered DIMMs built for Supermicro SuperBlade 7127R, 7127RG, 7127RG3, 7142G and 7427R servers. It runs at 1.35 V with CL11 latency and a 1Rx4 rank configuration.

Who Should Not Buy This Kit

Desktop PCs, workstations that require unbuffered memory and any system not listed above cannot use these registered modules. Buyers needing a different capacity, voltage or form factor must select another product.

The Specification That Decides Fit

The memory must be DDR3L 1600 ECC registered RDIMM in a 240-pin package; only Supermicro SuperBlade models 7127R, 7127RG, 7127RG3, 7142G and 7427R are confirmed compatible.

Pluspunten

  • 32 GB capacity from four 8 GB modules expands server memory
  • DDR3L 1600 CL11 at 1.35 V lowers power draw per module
  • ECC registered design protects data integrity in SuperBlade systems
  • 240-pin RDIMM form factor fits 7127R 7142G 7427R blade servers
  • Replaces Supermicro MEMDR380LHL07ER16 MEMDR380LSL10ER16 MEMDR380LSL14ER16 MEMDR380LSV04ER16

Specificaties

BrandOWC
Part Number1R6T31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 7127R Series
Supermicro SuperBlade 7127RG Series
Supermicro SuperBlade 7127RG3 Series
Supermicro SuperBlade 7142G Series
Supermicro SuperBlade 7427R Series

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 240-pin DDR3L RDIMMs fit the SuperBlade 7127R memory slots?

Yes, the kit uses 240-pin DDR3L 1600 RDIMMs that match the SuperBlade 7127R, 7127RG, 7127RG3, 7142G and 7427R memory slots.

What is the correct way to install the four 8 GB modules, and what step is often missed?

Power down the blade, open the chassis, insert each 1.35 V 1Rx4 RDIMM into the indicated slots until the latches click, and enable ECC in the BIOS — skipping the BIOS step is the common error.

When should the registered ECC modules be replaced in a SuperBlade 7427R?

Replace them if the system logs corrected ECC errors, fails memory diagnostics, or when upgrading to a different capacity or speed supported by the blade.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.