Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with gold contacts and black memory chips, no heat spreader

OWC

OWC 32GB DDR4 2400 CL17 2Rx4 288-pin 1.2V ECC Registered RDIMM Cisco UCS B200 M4 C220 M4

SKU CH-V2FB-QX72J

32 GB DDR4 2400 ECC registered RDIMM for Cisco UCS B200 M4 and C220 M4 servers

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes

Capacity 32GB

  • ECC registered design prevents data corruption in critical workloads
  • 32GB capacity in a single module maximises server density
  • DDR4 2400 CL17 timing matches Cisco UCS B200 M4 and C220 M4 specs
  • 2V operation reduces power draw in dense racks
  • 288-pin RDIMM form factor ensures direct compatibility with listed Cisco part numbers

32 GB DDR4 ECC RDIMM for Cisco UCS

This 32 GB DDR4 2400 CL17 registered DIMM is built for Cisco UCS B200 M4 and C220 M4 servers. It delivers ECC protection and registered buffering for workloads that demand data integrity and sustained uptime in enterprise environments.

Tool-free DIMM installation with registration rules

The 288-pin module seats in a standard DDR4 slot without tools, but the registered ECC design means it cannot be mixed with unbuffered or load-reduced memory. Populating slots in the order specified by the Cisco service guide avoids the most common boot-time errors.

Verify Cisco part numbers and slot population

Confirm the server uses part numbers such as HXMR1X322RVA or UCSMR1X322RVA before ordering. Check the existing memory configuration for rank limits per channel and ensure all installed modules share the same registered ECC specification.

Pluspunten

  • ECC registered design prevents data corruption in critical workloads
  • 32GB capacity in a single module maximises server density
  • DDR4 2400 CL17 timing matches Cisco UCS B200 M4 and C220 M4 specs
  • 2V operation reduces power draw in dense racks
  • 288-pin RDIMM form factor ensures direct compatibility with listed Cisco part numbers

Specificaties

BrandOWC
Part Number2R4D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B200 M4
Cisco UCS C220 M4

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How can I verify the 32GB DDR4 2400 CL17 2Rx4 ECC RDIMM is working after installation?

Enter the server BIOS or run a memory diagnostic tool; the POST screen should report 32GB at 2400 MHz with ECC registered mode active and no errors.

What ships in the box and what must I buy separately?

The box contains one 32GB 288-pin DDR4 ECC Registered RDIMM module; no cables, brackets or additional parts are included or required.

Which capacity should I choose for a Cisco UCS B200 M4 or C220 M4 upgrade?

This part number provides a single 32GB module; select the quantity that matches the total memory you need for your server configuration.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.