Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold edge connectors

OWC

OWC 32GB DDR4 2400 CL17 2Rx4 VLP ECC Registered DIMM memory upgrade

SKU CH-NPGH-36EE1

32 GB DDR4 ECC registered VLP RDIMM running at 2400 MHz CL17 for Supermicro SuperBlade servers

  • Capacity32GB
  • Type288-Pin DDR4 ECC VLP RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • 32 GB capacity lets you run more virtual machines simultaneously
  • ECC registered design detects and corrects single-bit errors in server workloads
  • DDR4 2400 speed matches the rated frequency of supported Supermicro SuperBlade systems
  • Very low profile 288-pin form factor fits dense blade chassis without clearance issues
  • Single 2Rx4 module simplifies population rules for the listed 7128 and 7428 models

Server Memory Upgrade

This 32GB DDR4 2400 module is built for Supermicro SuperBlade 7128 and 7428 series servers. It delivers registered ECC reliability in a very low-profile form factor that fits dense blade chassis. The single DIMM adds capacity without mixing buffer types.

Thermal and Power Profile

Operating at 1.2 volts, the module runs cool inside tightly packed blade enclosures. No heat spreader is fitted, so airflow from the system fans handles dissipation directly. Registered buffering reduces electrical load on the memory controller during sustained workloads.

Replaces Supermicro Parts

This upgrade replaces Supermicro part numbers including MEMDR432LCL02ER24 and MEMDR432LSV01ER. The jump is worth it when expanding memory in supported SuperBlade nodes or when standardising on a single vendor for warranty coverage. Not for desktop motherboards or unbuffered ECC configurations.

Pluspunten

  • 32 GB capacity lets you run more virtual machines simultaneously
  • ECC registered design detects and corrects single-bit errors in server workloads
  • DDR4 2400 speed matches the rated frequency of supported Supermicro SuperBlade systems
  • Very low profile 288-pin form factor fits dense blade chassis without clearance issues
  • Single 2Rx4 module simplifies population rules for the listed 7128 and 7428 models

Specificaties

BrandOWC
Part Number2R4V42R432GB
Capacity32GB
Type288-Pin DDR4 ECC VLP RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 7128RG-F2
Supermicro SuperBlade 7128RG-X
Supermicro SuperBlade 7428R-C3
Supermicro SuperBlade 7428R-C3N
Supermicro SuperBlade 7428R-T3

Vragen over dit artikel

How do I install this VLP ECC registered DIMM in a Supermicro SuperBlade 7128RG-F2, and which step is often missed?

Align the notch on the 288-pin module with the slot key, press straight down until both retention clips click, and ensure the 1.2V DDR4 2400 module is seated in a registered-channel slot — not an unbuffered or load-reduced channel.

What maintenance or replacement will this 32GB 2Rx4 module need later?

No scheduled maintenance is required; if a memory error appears, replace the single 32GB DIMM with an identical 2Rx4 CL17 registered module to keep rank and timing consistent.

What limit appears first when this DDR4 2400 CL17 kit runs sustained workloads?

The 2400 MT/s data rate and CL17 latency set the throughput ceiling; sustained use will hit bandwidth limits before thermal issues arise on this 1.2V VLP module.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.