Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold edge connector

OWC

OWC 32GB DDR4 2933MHz CL21 1.2V 288pin ECC Registered RDIMM memory upgrade

SKU CH-TNED-MSXH2

32GB DDR4 ECC registered RDIMM at 2933MHz CL21 for Dell PowerEdge FC640, M640, MX740c, MX840c and R450 servers

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 32GB

  • 32GB capacity supports demanding server workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2933MHz CL21 speed matches system requirements
  • 2V operation reduces power draw in compatible Dell PowerEdge servers
  • Backward compatible with 2133, 2400 and 2666MHz platforms

32GB DDR4 ECC Registered RDIMM

This 32GB DDR4 module is built for Dell PowerEdge servers including the FC640, M640, MX740c, MX840c and R450. It delivers error-correcting, registered memory for workloads that require data integrity and platform stability.

Registered ECC with 2Rx4 organisation

The single specification that decides fit is the registered ECC design with 2Rx4 ranking; this memory will not work in standard desktop computers and cannot be mixed with unbuffered modules.

32GB capacity at 2933MHz with backward support

At 32GB per DIMM the kit handles large virtualisation and database tasks comfortably, while the 2933MHz CL21 rating also runs at 2666MHz, 2400MHz and 2133MHz where the platform requires it.

Pluspunten

  • 32GB capacity supports demanding server workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2933MHz CL21 speed matches system requirements
  • 2V operation reduces power draw in compatible Dell PowerEdge servers
  • Backward compatible with 2133, 2400 and 2666MHz platforms

Specificaties

BrandOWC
Part Number2R9D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge FC640
Dell PowerEdge M640
Dell PowerEdge MX740c
Dell PowerEdge MX840c
Dell PowerEdge R450

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How does the 2933MHz speed behave when installed in a Dell PowerEdge R450?

The module runs at its rated 2933MHz CL21 in the R450; if the platform configures a lower memory bus it will down-clock automatically to 2666MHz, 2400MHz or 2133MHz while keeping ECC and registered operation intact.

What does the PC4-23400 designation limit in practice?

PC4-23400 is the JEDEC peak transfer rate for DDR4-2933; the actual throughput in a server is capped by the processor's memory controller and the number of populated channels, not by the module rating itself.

Will the 288-pin registered DIMM fit the MX740c blade slot?

Yes — the MX740c uses standard 288-pin DDR4 RDIMM sockets, so this 32GB 2Rx4 module seats directly without an adapter or low-profile bracket.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.