Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold edge connector

OWC

OWC 4GB DDR3 1600 CL11 1.5V 204-pin SODIMM for HP Envy 14

SKU CH-M9X9-BDKNY

4GB DDR3 1600 SODIMM upgrades HP Envy 14 laptops with CL11 timing and 1.5V operation

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 4GB capacity expands multitasking headroom for HP Envy 14
  • DDR3 1600 CL11 speed matches system memory timing
  • 5V JEDEC voltage ensures stable, warranty-safe operation
  • 204-pin SODIMM form factor fits laptop memory slots directly
  • Single-rank 1Rx8 organisation simplifies installation without configuration

HP Envy 14 DDR3 SODIMM Upgrade

This OWC module adds 4 GB of DDR3-1600 memory to compatible HP Envy 14 laptops. It uses the 204-pin SODIMM form factor and runs at the standard 1.5 V JEDEC voltage. The single-rank 1Rx8 design is non-ECC and unbuffered for straightforward installation.

Suits owners of DDR3 Envy 14 models.

Buyers with an HP Envy 14 series that uses DDR3 memory can install this stick directly. It is not for systems that require a different memory generation, a different pin count, or ECC functionality. Builders needing higher capacity per slot or registered modules should look elsewhere.

4 GB single-module capacity

The decisive specification is the 4 GB capacity delivered in one SODIMM. If the Envy 14 has a free slot this module adds exactly that amount; if the board only accepts larger densities or the slot is already occupied the upgrade will not fit the requirement.

Pluspunten

  • 4GB capacity expands multitasking headroom for HP Envy 14
  • DDR3 1600 CL11 speed matches system memory timing
  • 5V JEDEC voltage ensures stable, warranty-safe operation
  • 204-pin SODIMM form factor fits laptop memory slots directly
  • Single-rank 1Rx8 organisation simplifies installation without configuration

Specificaties

BrandOWC
Part Number1S6D31R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 14 Series using DDR3 Memory

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does the 204-pin SODIMM fit the HP Envy 14 memory slot?

Yes, the module is a 204-pin DDR3 SODIMM built for the HP Envy 14 series that uses DDR3 memory.

What is the correct way to seat the module, and what step do people often miss?

Align the notch with the slot key, insert at an angle, then press down firmly until both side clips click into place.

Will the 4GB 1Rx8 CL11 stick need any firmware updates or paired replacement later?

No firmware is required; if you add a second module later, match the same 1600 speed, CL11 timing and 1.5 V voltage for best stability.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.