Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with gold edge connector and black memory chips

OWC

OWC 4GB DDR3 1600 CL11 2Rx8 240-pin 1.5V Non-ECC UDIMM for HP Z230

SKU CH-YA8M-4ET5Y

Adds 4 GB of DDR3-1600 non-ECC memory to an HP Z230 workstation for faster multitasking

  • Capacity4GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 4GB capacity lets you run more applications simultaneously
  • DDR3 1600 speed with CL11 latency improves system responsiveness
  • 5V operation matches original HP Z230 specifications
  • 240-pin unbuffered non-ECC design ensures direct compatibility
  • JEDEC and RoHS compliant for warranty-safe upgrade

HP Z230 memory upgrade

This 4 GB DDR3 1600 module is built specifically for the HP Workstation Z230. It uses a 240-pin UDIMM form factor and runs at 1.5 V with CL11 latency. The single stick adds 4 GB of non-ECC capacity to compatible systems.

Straightforward desktop installation

The unbuffered DIMM fits into a standard 240-pin slot without tools. Align the notch, press until the latches click, and the system recognises the memory on boot. Problems only appear if the slot is dusty or the module is not fully seated.

Suits Z230 owners needing a small capacity boost

Builders who want more than 4 GB per slot or who require ECC registered memory should look at other options. This module is limited to the specific HP platform and DDR3 generation.

Pluspunten

  • 4GB capacity lets you run more applications simultaneously
  • DDR3 1600 speed with CL11 latency improves system responsiveness
  • 5V operation matches original HP Z230 specifications
  • 240-pin unbuffered non-ECC design ensures direct compatibility
  • JEDEC and RoHS compliant for warranty-safe upgrade

Specificaties

BrandOWC
Part Number1U6D32R804GB
Capacity4GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP Workstation Z230

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How can I verify the module is running at DDR3 1600 CL11 after installation?

Check the memory speed and CAS latency in the BIOS or with a tool like CPU-Z; the module should report 1600 MHz and CL11 timings when seated correctly in the HP Z230.

What comes in the box and do I need any extra parts for the HP Z230?

The package contains one 4 GB 240-pin DDR3 UDIMM (part 1U6D32R804GB); no additional cables, brackets or heat spreaders are required for the Z230.

Which capacity version should I choose for a balanced upgrade on the Z230?

This 4 GB DDR3 1600 CL11 2Rx8 module is the only capacity offered in this listing; add one or more identical sticks to reach the Z230's maximum supported memory.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.