Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold edge connector

OWC

OWC 4GB DDR3 1600 PC3-12800 CL11 204-pin SODIMM for HP Envy dv6

SKU CH-QXS5-39K34

A 4 GB DDR3 1600 SODIMM upgrade module built for HP Envy dv6 laptops using DDR3 memory

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boosts multitasking with 4GB DDR3 1600MHz capacity
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • CL11 latency at 1.5V for stable operation
  • 204-pin SODIMM fits HP Envy dv6 DDR3 slots
  • Single 1Rx8 rank module simplifies installation

HP Envy dv6 DDR3 upgrade

This 4GB DDR3 1600 SODIMM is built specifically for HP Envy dv6 laptops that use DDR3 memory. It provides a straightforward capacity increase for owners of those machines who need more RAM for everyday workloads.

JEDEC standard 204-pin module

The stick follows JEDEC and RoHS specs, runs at 1.5V without a heat spreader, and uses an unbuffered 1Rx8 layout. Its standard 204-pin SODIMM form factor fits the laptop slot directly with no extra adapters or configuration steps.

Replaces slower or smaller DDR3 sticks

Swapping an existing lower-capacity or lower-speed DDR3 module for this CL11 1600MHz unit raises the memory ceiling for multitasking and larger files. The jump is worthwhile when the current RAM limit causes visible slowdowns in typical use.

Pluspunten

  • Boosts multitasking with 4GB DDR3 1600MHz capacity
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • CL11 latency at 1.5V for stable operation
  • 204-pin SODIMM fits HP Envy dv6 DDR3 slots
  • Single 1Rx8 rank module simplifies installation

Specificaties

BrandOWC
Part Number1S6D31R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ENVY dv6 Series using DDR3 Memory

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What does the DDR3 1600 PC3-12800 rating mean for real-world speed?

The module runs at 1600 MHz with a peak transfer rate of 12800 MB/s, so the memory bus will not exceed that bandwidth in this HP Envy dv6.

Will the 204-pin SODIMM fit the HP Envy dv6 memory slot?

Yes, the 204-pin DDR3 SODIMM form factor matches the slots used by the HP Envy dv6 series that takes DDR3 memory.

How is the module installed and what step is often missed?

Power off the laptop, remove the battery if possible, open the memory door, insert the SODIMM at an angle until the gold contacts are fully seated, then press down until the side clips click — many forget to push firmly enough to engage both clips.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.