Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Eight green DDR4 RDIMM modules with gold contacts and black chips

OWC

OWC 512GB (8×64GB) DDR4 2933 ECC Registered RDIMM memory upgrade

SKU CH-J4XK-KAX90

Eight 64 GB DDR4 2933 ECC registered RDIMMs totalling 512 GB for HP Z6 G4 workstations

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 512GB (8 x 64GB)

  • 512 GB total capacity from eight 64 GB modules
  • ECC registered design protects data integrity in workstations
  • DDR4 2933 MHz CL21 at 1.2 V for efficient performance
  • 288-pin RDIMM form factor fits HP Z6 G4 slots
  • Backward compatible with 2133, 2400 and 2666 MHz systems

512 GB DDR4 ECC RDIMM kit for HP Z6 G4

This 512 GB kit contains eight 64 GB DDR4 2933 CL21 registered ECC modules built for the HP Workstation Z6 G4. Each 288-pin RDIMM runs at 1.2 V with a 2Rx4 organisation and no heat spreader. The memory is validated as a direct replacement for the listed HP part numbers.

Who should use this memory

Workstation and server builders who need registered ECC DDR4 for the HP Z6 G4 will find a matched eight-module set here. Buyers with standard desktop motherboards cannot use registered DIMMs. Systems that require unbuffered ECC or load-reduced DIMMs are also incompatible with this kit.

Registered ECC DDR4 2933 CL21 at 1.2 V

The modules operate at DDR4 2933 (PC4-23400) with CL21 latency and 1.2 V. Registered ECC signalling is mandatory for the target platform. Backward compatibility with 2133, 2400 and 2666 MHz speeds is supported.

Pluspunten

  • 512 GB total capacity from eight 64 GB modules
  • ECC registered design protects data integrity in workstations
  • DDR4 2933 MHz CL21 at 1.2 V for efficient performance
  • 288-pin RDIMM form factor fits HP Z6 G4 slots
  • Backward compatible with 2133, 2400 and 2666 MHz systems

Specificaties

BrandOWC
Part Number2R9D42R4512K
Capacity512GB (8 x 64GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP Workstation Z6 G4

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does the 288-pin DDR4 RDIMM form factor fit the HP Workstation Z6 G4 memory slots?

Yes, the 288-pin DDR4 ECC Registered DIMM form factor matches the HP Workstation Z6 G4 memory slots exactly.

What is the correct installation sequence for the eight 64GB modules in the Z6 G4?

Populate all eight slots following the Z6 G4 memory population guide; the step most often missed is placing modules in the correct channel order for 8×64GB.

When should the 1.2V ECC Registered RDIMMs be replaced in a Z6 G4?

Replace modules only if ECC logs report correctable errors rising above threshold or the system fails memory diagnostics.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.