Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two black DDR3 UDIMM modules, 240-pin, no heat spreader

OWC

OWC 8GB (2x4GB) DDR3 1066 CL7 ECC Unbuffered UDIMM Kit

SKU CH-Z3HV-KXKXP

An 8 GB dual-channel DDR3-1066 ECC unbuffered UDIMM kit for desktops, workstations and servers

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

  • ECC protection guards data integrity in workstations and servers
  • Dual-channel 8 GB kit (2 × 4 GB) expands multitasking headroom
  • DDR3 1066 CL7 timing delivers responsive throughput at 1.5 V
  • 240-pin unbuffered UDIMM fits standard desktop, workstation and server slots
  • JEDEC and RoHS compliant for warranty-safe upgrades

8GB DDR3 ECC Kit for Workstations

This dual-channel kit provides 8GB of DDR3 1066 memory in two 4GB unbuffered UDIMMs with CL7 latency and ECC support. It is designed for desktop workstations, servers and NAS systems that require error-correcting memory for data integrity.

240-Pin UDIMM Installation Requirements

Each module uses the standard 240-pin DDR3 form factor and operates at 1.5V, fitting motherboards with DDR3 DIMM slots that accept unbuffered ECC memory. The kit occupies two slots and leaves remaining slots free for future expansion if the board supports higher capacities.

Low-Voltage Operation and Thermal Profile

Running at 1.5V without heat spreaders, the modules rely on case airflow for cooling during typical workloads. The JEDEC-standard design keeps power draw modest and noise non-existent, as there are no active cooling components on the sticks themselves.

Pluspunten

  • ECC protection guards data integrity in workstations and servers
  • Dual-channel 8 GB kit (2 × 4 GB) expands multitasking headroom
  • DDR3 1066 CL7 timing delivers responsive throughput at 1.5 V
  • 240-pin unbuffered UDIMM fits standard desktop, workstation and server slots
  • JEDEC and RoHS compliant for warranty-safe upgrades

Specificaties

BrandOWC
Part Number8E5D32R8008P
Capacity8GB (2 x 4GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will these modules work in a standard desktop motherboard that supports DDR3?

Yes, they are built to the JEDEC DDR3 standard at 1066 MHz with CL7 latency and 1.5 V operation, making them compatible with desktop boards that accept unbuffered ECC UDIMMs.

Does this kit require a system that specifically supports ECC memory?

The modules include ECC circuitry and are designed for workstations, servers and NAS units that can use the error-correction feature; a standard desktop without ECC support will typically ignore it.

What physical slot do these DIMMs fit?

Each module uses the 240-pin DDR3 UDIMM form factor, so they install directly into any desktop DDR3 DIMM slot keyed for that pin count.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.