Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular SODIMM module with gold edge connector and black memory chips, no heat spreader

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 204-pin 1.5V Non-ECC SODIMM for HP Envy 4 memory upgrade

SKU CH-SP8M-Q5P72

An 8 GB DDR3 SODIMM running at 1600 MHz with CL11 latency for HP Envy 4 laptops

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 8GB capacity lets you run more apps simultaneously
  • DDR3 1600 speed with CL11 latency boosts system responsiveness
  • 204-pin SODIMM form factor fits HP Envy 4 DDR3 slots
  • 5V operation matches original laptop power requirements
  • JEDEC and RoHS compliant for warranty-safe upgrade

HP Envy 4 DDR3 upgrade

This OWC module adds 8GB of DDR3 1600 memory to HP Envy 4 laptops that use DDR3 SODIMMs. It runs at PC3-12800 speed with CL11 latency and 1.5V voltage. The 204-pin unbuffered stick is non-ECC and uses a 2Rx8 rank configuration.

Suits single-slot Envy 4 owners

It fits users with one free slot who want the maximum 8GB capacity in a single module. Builders needing ECC error correction, registered buffering or a lower 1.35V voltage should look elsewhere. Systems that only accept 4GB per slot or require a 1Rx8 organisation will not be compatible.

204-pin DDR3 SODIMM form factor

The 204-pin edge connector and DDR3 signalling are the decisive physical and electrical interface. If the target machine uses a different pin count, a different DDR generation or a DIMM form factor, this module will not install.

Pluspunten

  • 8GB capacity lets you run more apps simultaneously
  • DDR3 1600 speed with CL11 latency boosts system responsiveness
  • 204-pin SODIMM form factor fits HP Envy 4 DDR3 slots
  • 5V operation matches original laptop power requirements
  • JEDEC and RoHS compliant for warranty-safe upgrade

Specificaties

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 4 Series using DDR3 Memory

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does my HP Envy 4 laptop need a free 204-pin SODIMM slot to accept this 8GB DDR3 1600 module?

Yes, the module is a single 204-pin DDR3 SODIMM, so one empty SODIMM slot in the HP Envy 4 is required for installation.

Will this 1.5V DDR3 1600 CL11 module run stably alongside any existing DDR3 1600 memory already installed in my HP Envy 4?

It is designed to meet JEDEC-standard DDR3 1600 PC3-12800 timings at 1.5V, matching the factory specification for the HP Envy 4 series using DDR3 memory.

How can I verify the new 8GB DDR3 1600 module is recognised at the correct 1600MHz speed after fitting it?

Check the system BIOS or a utility such as CPU-Z; the memory should report DDR3-1600 (PC3-12800) with CL11 latency at 1.5V.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.