Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold edge contacts

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 204-pin 1.5V Non-ECC SODIMM for HP ProDesk 400 G1 Mini 600 G1 Mini

SKU CH-876B-PS8FD

An 8 GB DDR3 1600 CL11 SODIMM upgrade for HP ProDesk 400 G1 Mini and 600 G1 Mini systems

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boost responsiveness with 8 GB DDR3 1600 memory
  • JEDEC-standard 1.5 V module ensures warranty-safe upgrade
  • CL11 latency and 2Rx8 rank optimise data throughput
  • 204-pin SODIMM fits HP ProDesk 400 G1 Mini and 600 G1 Mini
  • Single-module design simplifies DIY installation

OWC 8GB DDR3 SODIMM for HP ProDesk Mini

This 8GB DDR3 1600 module is built specifically for HP ProDesk 400 G1 Mini and 600 G1 Mini systems. It fits the 204-pin SODIMM slot and runs at 1.5V without ECC or buffering. The single stick upgrades one slot in these compact desktops.

8GB capacity handles everyday multitasking

Eight gigabytes lets you keep several browser tabs, office apps and background services open at once. The CL11 latency and PC3-12800 bandwidth suit the memory controller in these Minis. Heavy video editing or large virtual machines will exceed the headroom of a single 8GB stick.

2Rx8 dual-rank organisation

The module uses a 2Rx8 configuration that matches the density the ProDesk Mini chipset expects. Systems that require single-rank 1Rx8 SODIMMs will not recognise this stick correctly. Verify the rank requirement in your service manual before ordering.

Pluspunten

  • Boost responsiveness with 8 GB DDR3 1600 memory
  • JEDEC-standard 1.5 V module ensures warranty-safe upgrade
  • CL11 latency and 2Rx8 rank optimise data throughput
  • 204-pin SODIMM fits HP ProDesk 400 G1 Mini and 600 G1 Mini
  • Single-module design simplifies DIY installation

Specificaties

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 400 G1 Mini
HP ProDesk 600 G1 Mini

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 1.5V DDR3 1600 SODIMM run reliably in my ProDesk 400 G1 Mini alongside the original memory?

The module matches the HP ProDesk 400 G1 Mini and 600 G1 Mini specification of 1.5V DDR3 1600 CL11 2Rx8 204-pin Non-ECC SODIMM, so it operates at the same voltage and timing as the factory-installed memory.

How can I verify the 8GB module is recognised at the correct 1600 speed after installation?

Boot the ProDesk, open Task Manager or BIOS, and confirm the slot shows 8GB running at 1600 MT/s with CL11 latency.

Does the single 8GB 204-pin SODIMM ship with any brackets or thermal pads, or must I supply them?

The upgrade consists of the bare 204-pin SODIMM only; no heat spreader, brackets or thermal pads are included.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.