Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with eight black memory chips in a row, gold contacts along bottom edge, no heat spreader

OWC

OWC 8GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM HP OMEN X 900-202nf 900-203nf 900-203nl 900-210 900-210ng

SKU CH-02RP-J8WDD

8 GB DDR4-2666 CL19 UDIMM module validated for HP OMEN X 900-series desktops

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • 8GB capacity adds multitasking headroom for demanding workloads
  • DDR4 2666MHz CL19 speed matches HP OMEN X factory spec
  • 2V low-voltage operation reduces system power draw
  • 288-pin UDIMM form factor fits listed OMEN X desktops directly
  • JEDEC and RoHS compliant for warranty-safe upgrades

OWC 8GB DDR4 for HP OMEN X 900

This 8 GB DDR4 module is built for HP OMEN X desktops including the 900-202nf, 900-203nf, 900-203nl, 900-210 and 900-210ng. It suits owners who want a straightforward memory upgrade without configuration changes. The kit is not for buyers who need ECC error correction or registered buffering for server workloads.

2666 MHz CL19 1.2 V JEDEC standard

The single specification that decides fit is the DDR4 2666 MHz PC4-21300 CL19 1.2 V unbuffered UDIMM profile. It matches the JEDEC standard used by the listed OMEN X models and will also run at 2133 MHz or 2400 MHz if the system requires a lower speed. A different speed, voltage or latency will prevent the system from posting.

Tool-free DIMM slot installation

Installation means opening the case, aligning the 288-pin key with the motherboard slot and pressing until the retention clips click. No heat spreader is fitted, so clearance is minimal. The usual mistake is seating the module off-centre, which leaves one clip unlatched and causes a no-boot condition.

Pluspunten

  • 8GB capacity adds multitasking headroom for demanding workloads
  • DDR4 2666MHz CL19 speed matches HP OMEN X factory spec
  • 2V low-voltage operation reduces system power draw
  • 288-pin UDIMM form factor fits listed OMEN X desktops directly
  • JEDEC and RoHS compliant for warranty-safe upgrades

Specificaties

BrandOWC
Part Number2U6D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP OMEN X 900-202nf
HP OMEN X 900-203nf
HP OMEN X 900-203nl
HP OMEN X 900-210
HP OMEN X 900-210ng

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 2666MHz speed run at that rate in my HP OMEN X 900-210?

The module is rated for 2666MHz and will operate at that speed if the motherboard supports it; otherwise it will downclock to 2400MHz or 2133MHz automatically.

Does the PC4-21300 label limit the bandwidth I can actually use?

PC4-21300 is the JEDEC peak transfer rate for DDR4 2666; real-world throughput is lower and also depends on the memory controller and channel configuration.

Will this 288-pin UDIMM fit the memory slots in my 900-202nf?

Yes, the 288-pin unbuffered DIMM form factor matches the DDR4 slots used in the listed HP OMEN X models.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.