Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Six black 120mm fans with infinity mirror ARGB rings, boxed together

Portholic

Portholic 120mm Infinity Mirror ARGB Case Fan 600-1800RPM Black 6-Pack

SKU CH-ZC8E-MD33T

Six 120 mm ARGB case fans with infinity-mirror lighting, hydraulic bearings and PWM speed control from 600 to 1 800 RPM

  • TypeCase Fan
  • ColorBlack
  • LEDARGB

Option 6 Packs

  • Vivid addressable RGB with infinity mirror depth for immersive lighting
  • 11-blade design delivers 63 CFM airflow at 1800 RPM for strong cooling
  • Hydraulic bearing runs at 23.5 dBA for quiet operation
  • PWM speed control from 600 to 1800 RPM adapts to temperature
  • Six fans plus RF remote and hub for complete case illumination

120mm Infinity Mirror ARGB Fan 6-Pack

This six-pack of 120mm case fans targets builders who want addressable RGB lighting and coordinated cooling across multiple chassis positions. The infinity mirror design creates a three-dimensional visual effect visible from both front and rear. Each fan uses a 5V 3-pin ARGB connector for motherboard synchronization. Builders needing only one or two fans should look elsewhere.

Sustained Load Behaviour

The hydraulic-bearing fans operate between 600 and 1800 RPM under PWM control, adjusting speed automatically with temperature changes. At maximum speed they deliver 63 CFM airflow at 24 dBA, while the specifications also list a 650–800 RPM range producing 33 CFM at 23.5 dBA for quieter operation. The 11-blade design balances static pressure and airflow for consistent cooling during extended workloads.

Installation and Common Issues

Mounting uses standard 120mm screw holes and the package includes a fan controller plus a hub for managing up to six units. Power draws 0.35A at 12V (3.8W per fan) via 4-pin PWM connectors. The ARGB cables require a compatible 5V 3-pin header; systems without that header cannot control the lighting effects. Cable routing for six fans plus hub may challenge tight chassis.

Pluspunten

  • Vivid addressable RGB with infinity mirror depth for immersive lighting
  • 11-blade design delivers 63 CFM airflow at 1800 RPM for strong cooling
  • Hydraulic bearing runs at 23.5 dBA for quiet operation
  • PWM speed control from 600 to 1800 RPM adapts to temperature
  • Six fans plus RF remote and hub for complete case illumination

Specificaties

TypeCase Fan
ColorBlack
LEDARGB

Andere versies van dit model

Nog 3 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How loud is the 120mm Portholic fan at its maximum 1800 RPM speed?

The manufacturer lists a noise value of 23.5 dBA and highlights minimal noise levels of 24±10% dBA at full speed, thanks to ultra-thin blades designed to reduce vibration and turbulence.

Does the 6-pack include the 5V 3-pin ARGB controller and hub needed to run the lighting effects?

Yes, the package contains the case fans, a fan controller and a fan hub, allowing you to manage the addressable RGB illumination and PWM speeds via the included RF remote.

Will the hydraulic-bearing fans rated for 20,000 hours work reliably with an older 12V motherboard header?

The fans operate at 12V and 0.35A with a 4-pin PWM connector, so they are compatible with standard 12V motherboard headers and will run between 600 and 1800 RPM under PWM control.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.